Twin Eagles Eagle One TE1BQ54 Parts Diagram
Grill 54-Inch Eagle One gas grill with sear zone and infrared rotisserie (TE1BQ54RSN natural gas / TE1BQ54RSL propane)
About the TE1BQ54RS parts
This page shows the exploded parts diagram and full parts list for the Twin Eagles Eagle One TE1BQ54, a 54-inch eagle one gas grill with sear zone and infrared rotisserie (te1bq54rsn natural gas / te1bq54rsl propane). It lists 113 replacement parts with the quantity this model uses, and 57 of them can be ordered online today. Tap a red dot or pick a part from the list to see its Twin Eagles part number. Part numbers are shown the way Twin Eagles prints them. A leading S or a trailing Y on some numbers (S13803, 13803, 13803Y) usually means the same part, so text us if you are unsure.
Source: Twin Eagles Eagle One Installation, Use and Care Manual (P/N 17582F).
Find your model and serial number
- Pull out the drip tray and set it aside.
- Look up under the right side of the control panel. The data tag faces down, so crouch down or use your phone camera.
- On C-Series grills there is also a data plate on the bottom right of the firebox, near the regulator. On the pellet grill, the plate is under the right ash drawer.
- Text us a photo of the tag. We’ll tell you exactly which parts fit.
Reading a TEBQ model number
TEBQ36RS-CN: 36 is the width in inches, R means it has the infrared rotisserie (G is grill only), S means a sear zone burner, -C is the series, and N or L is natural gas or propane.
B-Series or C-Series? The letter after the dash on the tag is the series. Parts are not always the same between the two, so check before you order.
Watch: where to find your model and serial number (25 sec)
Item
Want us to double-check the fit? Text us or call (866) 348-4618.