Pro Grill Twin Eagles Parts Diagrams

Twin Eagles TEBQ30R-B Parts Diagram

Grill 30-Inch B-Series gas grill with infrared rotisserie

Twin Eagles TEBQ30R-B exploded parts diagram

About the TEBQ30R-B parts

This page shows the exploded parts diagram and full parts list for the Twin Eagles TEBQ30R-B, a 30-inch b-series gas grill with infrared rotisserie. It lists 77 replacement parts with the quantity this model uses, and 38 of them can be ordered online today. Tap a red dot or pick a part from the list to see its Twin Eagles part number. Part numbers are shown the way Twin Eagles prints them. A leading S or a trailing Y on some numbers (S13803, 13803, 13803Y) usually means the same part, so text us if you are unsure.

Source: Twin Eagles TEBQ B-Series replacement parts list.

Find your model and serial number

  1. Pull out the drip tray and set it aside.
  2. Look up under the right side of the control panel. The data tag faces down, so crouch down or use your phone camera.
  3. On C-Series grills there is also a data plate on the bottom right of the firebox, near the regulator. On the pellet grill, the plate is under the right ash drawer.
  4. Text us a photo of the tag. We’ll tell you exactly which parts fit.

Reading a TEBQ model number

TEBQ36RS-CN: 36 is the width in inches, R means it has the infrared rotisserie (G is grill only), S means a sear zone burner, -C is the series, and N or L is natural gas or propane.

B-Series or C-Series? The letter after the dash on the tag is the series. Parts are not always the same between the two, so check before you order.

Watch: where to find your model and serial number (25 sec)