Pro Grill Twin Eagles Parts Diagrams

Twin Eagles TESG-24 Salamangrill Parts Diagram

Specialty 24-Inch Salamangrill infrared broiler

Twin Eagles does not publish an exploded drawing for this model, so use the parts list. Not sure which part you have? Text us a photo and we’ll match it.

About the TESG-24 parts

This page shows the exploded parts diagram and full parts list for the Twin Eagles TESG-24 Salamangrill, a 24-inch salamangrill infrared broiler. It lists 25 replacement parts with the quantity this model uses, and 10 of them can be ordered online today. Tap a red dot or pick a part from the list to see its Twin Eagles part number. Part numbers are shown the way Twin Eagles prints them. A leading S or a trailing Y on some numbers (S13803, 13803, 13803Y) usually means the same part, so text us if you are unsure.

Source: Twin Eagles Salamangrill Owner’s Manual (P/N 18583E).

Find your model and serial number

  1. Pull out the drip tray and set it aside.
  2. Look up under the right side of the control panel. The data tag faces down, so crouch down or use your phone camera.
  3. On C-Series grills there is also a data plate on the bottom right of the firebox, near the regulator. On the pellet grill, the plate is under the right ash drawer.
  4. Text us a photo of the tag. We’ll tell you exactly which parts fit.

Reading a TEBQ model number

TEBQ36RS-CN: 36 is the width in inches, R means it has the infrared rotisserie (G is grill only), S means a sear zone burner, -C is the series, and N or L is natural gas or propane.

B-Series or C-Series? The letter after the dash on the tag is the series. Parts are not always the same between the two, so check before you order.

Watch: where to find your model and serial number (25 sec)