Based on current listings checked October 2026. Your exact price depends on model, size and part number.
Most gas fire pit repairs cost about $150 to $850, depending on the part and the ignition system. A cleaning and service visit usually runs about $75 to $200, and simple fixes like an igniter or thermocouple often land near the low end.
Price insights
- Outdoor gas fire feature repairs usually run about $150 to $850.
- Cleaning and a basic service visit typically cost $75 to $200.
- Many no-light calls are clogged burners, spider webs, wet media or a dead battery, not a failed part.
- Electronic ignition systems with remotes cost $400 to $2,000 to install, and more to repair than match-lit pits.
- Valve and gas line work should always go to a pro.
Gas fire pit repair prices
| Service | Typical price |
|---|---|
| Fire pit cleaning and service visitBurner, media, ports and igniter. Same range as gas fireplace cleaning. | $75 to $200 |
| Outdoor gas fire feature inspectionLeak check, flame check, ignition test. | $100 to $200 |
| Service call / minimum feeLabor commonly $50 to $150 per hour. | about $100 |
| Igniter repair or replacementSpark igniter, wire or battery box. Comparable gas hearth pricing. | $85 to $200 |
| Thermocouple replacementCommon on pits with a safety pilot. | $75 to $350 |
| Gas valve repair or replacementOEM valve only. Pro job. | $150 to $350 |
| Outdoor fire feature repair, typical rangeCovers most fire pit repairs. | $150 to $850 |
| Electronic ignition kit (switch, remote, flame sensor)Upgrade or replacement of the ignition system. | $400 to $2,000 |
| Gas line repairLicensed gas fitter. | $275 to $1,000 |
| Fire glass refillPlus labor if installed by a tech. | $20 to $40 per 10 lb bag |
| Lava rock refillBag size 10 to 50 lb. | $20 to $50 per bag |
Typical ranges as of October 2026 from published service rates and price surveys. Local pricing varies.
How fire pit repair is priced
Gas fire pits have fewer parts than a grill or an indoor fireplace, but they live outside year round. Rain, sprinklers, dust, spiders and sun take a toll on igniters, thermocouples and valves. Repair pricing follows the same pattern as other gas appliance work: a service call, labor, and parts.
Outdoor gas fire feature repairs generally run about $150 to $850. Labor commonly runs $50 to $150 an hour, and most techs have a minimum fee of around $100. Simple jobs like cleaning out the burner or replacing an igniter stay near the low end. Valve replacements, ignition system replacements and gas line work push toward the top.
Need the part? Pro Grill can find it
Send us your brand, model and the part you need. We source OEM parts, including ones that aren't listed in our online store.
Ask Pro Grill for a partWant a pro to handle it?
Most companies in our network are dealers or have dealer accounts, so they can usually bring the right part and install it in one visit.
Three types of fire pit, three price levels
- Match-lit pits. A burner ring or pan, a key valve and no pilot. These are cheap to repair. Most problems are clogged ports, wet media, or a stuck key valve.
- Spark ignition with a safety pilot or thermocouple. A push button igniter lights a pilot, and a thermocouple keeps the valve open. Repairs are mid-range: thermocouples, igniters and valves.
- Electronic ignition (with remote, app or switch). A control module, flame sensor, igniter and solenoid valve. These are the most convenient and the most expensive to fix. A full electronic ignition kit costs about $400 to $2,000.
Know which one you have before you call. The tech will ask, and it helps them bring the right parts.
Common fire pit repairs and their costs
Fire pit will not light
The most common call. Before paying for a repair, check the gas supply (tank level or that the supply valve is open), the battery in the igniter, and whether the fire glass or lava rock is soaked from rain. On propane pits, open the tank valve slowly first, then the fire pit valve. Opening the fire pit valve first can trip the tank's flow limiter. Our guide on a fire pit that will not light covers these checks.
If those check out, igniter repairs typically run about $85 to $200, and thermocouple replacement about $75 to $350.
Low or uneven flame
This is usually clogged burner ports, spider webs in the air mixer, too much media piled on the burner, or a regulator problem on propane. A cleaning visit at $75 to $200 often fixes it. See our guide on a fire pit with a low flame.
Valve problems
A key valve that sticks or a control valve that will not hold is a pro repair. Valve work usually costs about $150 to $350. Never use a non-OEM or unlisted valve on a gas fire feature.
Electronic ignition failures
When a remote or app-controlled pit stops working, the problem can be a dead battery pack, a failed control module, a bad flame sensor or water in the electronics. Diagnosing it usually starts at a service call. If the whole system needs replacing, expect the ignition kit price range of about $400 to $2,000 plus labor.
Gas line leaks
If you smell gas around the fire pit, shut off the gas at the supply valve or tank, keep flames and sparks away, and call your gas utility or 911 from a safe place if the smell is strong. Gas line repairs usually cost about $275 to $1,000 and should be done by a licensed gas fitter.
For part prices on burners, igniters, thermocouples, valves and ignition kits, see the fire pit parts cost guide.
Cleaning and maintenance costs
A fire pit cleaning and service visit usually costs about $75 to $200, in line with gas fireplace cleaning. That typically includes removing the media, cleaning the burner and pan, clearing the ports, checking the igniter and thermocouple, leak checking the connections, and test firing. Media refills cost extra: fire glass runs about $20 to $40 per 10 pound bag and lava rock about $20 to $50 per bag.
The cheapest repair is the one you avoid. Keep the pit covered when not in use (covers run about $25 to $50), make sure the pan drains so water does not sit on the burner, and clean out spider webs each spring. Our fire pit maintenance guide lays out a simple routine.
Region notes
In our service areas, the biggest factors are water and sun. Sprinkler overspray and winter rain are the top cause of fire pit no-light calls in Southern California. In Phoenix, intense UV and heat wear out wiring, battery boxes and plastic components faster. In Utah, freeze cycles crack media and can damage pans that hold water. Coastal pits corrode faster from salt air, so expect thermocouples and igniters to need replacing sooner. Labor rates are generally highest along the California coast.
DIY vs. hiring a pro
Safe homeowner jobs: replacing the igniter battery, drying out or replacing wet media, cleaning burner ports with a soft brush, clearing spider webs from the air mixer, and checking the propane tank. Leave valves, gas lines, regulators on natural gas systems and electronic control modules to a pro.
Have the brand and model ready before calling. Many fire pits use burner systems from makers like Warming Trends, Hearth Products Controls, American Fyre Designs and The Outdoor Plus. Look for a label on the burner pan, the valve, or inside the access panel.
Most service companies in our network are dealers or have dealer accounts, so they can usually get the right part and install it on the same visit. Find fire pit repair pros, schedule a fire pit cleaning, or search by ZIP code. If you just need a part, Pro Grill can help find it. For indoor or outdoor fireplace work, see our gas fireplace service cost guide.
Frequently asked questions
How much does it cost to repair a gas fire pit?
Most gas fire pit repairs cost about $150 to $850. Simple fixes like a cleaning or an igniter are near the low end, while electronic ignition and valve work cost more.
Why won't my gas fire pit light?
The most common causes are an empty tank or closed supply valve, a dead igniter battery, wet media, clogged burner ports or a failing thermocouple.
How much does it cost to clean a gas fire pit?
A professional cleaning and service visit usually runs about $75 to $200, plus the cost of any new fire glass or lava rock.
Is it worth repairing a gas fire pit?
Usually yes for built-in fire pits, since the burner and ignition parts cost far less than rebuilding the feature. Cheap prefab propane tables may not be worth an expensive repair.
Can I convert a match-lit fire pit to electronic ignition?
Often yes. An electronic ignition kit with a switch, remote and flame sensor costs about $400 to $2,000, and it should be installed by a qualified pro.
