Mobile service
We come to you in Silverado
Our technicians drive to your house with the tools and parts and work on the grill in your yard or on your patio. You don't haul a greasy grill to a shop, and you don't spend a weekend scrubbing it yourself.
This matters most for built-ins. A grill set into a masonry or stucco island can't be loaded into a truck, so the work has to happen on site. We do it there every day.
We cover Silverado Canyon, Ladd Canyon, Williams Canyon, Modjeska Canyon, Black Star Canyon and Santiago Canyon. If your street isn't named here, ask when you book and we'll confirm.
Deep cleaning
Deep BBQ grill cleaning
A deep cleaning is a full teardown, not a wipe-down. We take the grill apart, clean each piece, and put it back together so it lights and cooks evenly. Here is what's included:
- Cooking grates scrubbed and degreased
- Burners removed, cleaned and the ports cleared
- Heat plates or flavorizer bars cleaned or flagged for replacement
- Briquette trays emptied and cleaned
- Firebox scraped out, including the corners where carbon collects
- Drip tray and grease management system cleaned out
- Igniter electrodes cleaned and checked for a good spark
- Hood interior and outside stainless cleaned and polished
- Our work area cleaned up when we finish
Buildup is more than an eyesore. Old grease feeds flare-ups and can catch fire in the firebox. Carbon and debris in the burner ports make the flame uneven, so one side runs hot and the other doesn't. Moisture trapped under grease and ash speeds up rust, and burners that sit in that mess rot out sooner than they should.
A cleaning gets the grill working properly again and makes problems easier to spot. It doesn't repair worn-out parts, and we'll tell you which ones are done.

Start with the symptom
BBQ repair at your Silverado home
Most grill problems come down to a worn part, a blocked passage or a bad connection. These are the calls we get most, with what usually causes each one and what we do.
Spiders in the burner tubes
Spiders and nests block the venturi tubes and starve the burner of gas, which gives you a weak flame or flames that burn at the wrong spot. We clear the tubes, clean the burners and check for damage.
Low heat or a weak flame
Common causes are clogged ports, a regulator that has gone into low-flow bypass mode, or a failing burner. We test the pressure and the burner and fix what we find.
Hot spots
When one area scorches and another stays cool, the cause is usually uneven burner output, missing or warped heat plates, or grease debris in the ports. We clean, rebalance and replace the plates that are shot.
Flare-ups and grease fires
Flames leaping above the grates mean grease is building up in the firebox or drip tray. We clean it out, replace burned-through parts and show you where grease collects on your model.
Smells like gas
Shut the gas off at the tank or the line and don't light the grill until it's been checked. We check the hose, regulator, fittings and valves for leaks and replace whatever is at fault.
Clicks but won't light
A dead battery, a dirty or cracked electrode, or a loose wire is the usual cause. We test the igniter and replace the module, wire or electrode that failed.
Burned-through heat shields and briquette trays
These parts take the most heat and drip, so they wear out first. We replace them with the right fit for your grill, and the cooking improves right away.
Repair it right
We diagnose first, then buy parts
The same symptom can come from different problems. A weak flame might be a clogged tube, a bad regulator or a worn burner. Swapping parts by guesswork wastes money, so we check the grill before replacing anything.
It speeds things up if you take a photo of the model and serial number label before we arrive. It's usually on the frame, inside a cabinet door or on the back panel. Our trucks carry parts for most brands, and we can order more from store.progrill.com if your grill needs something specific.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When one part fails on a built-in, repair is almost always the better choice. The island, the countertop and the gas line are already built around that grill, and replacing a burner or igniter costs far less than tearing it all out.
We also design, fabricate and repair outdoor kitchens. That includes islands, cabinets, doors and drawers, and the grill, side burner and storage that go in them.
We service more than gas grills. Smokers, griddles, pizza ovens, fireplaces and fire pits get the same cleaning and repair work.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas connections, burners and ignition system. You get a written report listing what's in good shape, what's wearing and what needs attention. It's useful if you're buying a house with a grill, or if you want to know where an older grill stands before the season starts.
Most homes should have a deep cleaning every 6 to 12 months. If you grill several times a week, lean toward the shorter end.
The Protection Plan membership puts those cleanings on a schedule so you don't have to remember. Ask when you book and we'll explain how it works.
Wear and tear
What wears grills out in Silverado
Inland heat, dust and debris do most of the damage. Dust and ash settle into burner ports and drip trays, and the burners have to work harder to light and hold a flame.
Spiders are the other regular problem. They build in the venturi tubes, block the gas flow and cause weak or uneven flames. A cleaning before the busy grilling months, and a look inside the tubes when the flame changes, prevents most of it.
When it's time to replace
New grills, measured, installed and hauled away
Sometimes repair doesn't make sense, such as when the firebox has rusted through or parts cost more than the grill is worth. In that case we measure the cutout, sell you a replacement that fits, install it and haul the old grill away.
Measuring first avoids the usual built-in headache of a new grill that doesn't fit the opening.

What to expect
What a visit looks like
- You book online and tell us the grill type and what's wrong.
- The technician arrives in the scheduled window and looks at the grill.
- We explain what we find and what the work involves before starting.
- We clean or repair on site, using parts from the truck when we have them.
- We clean up our work area and go over what we did.
Booking takes a couple of minutes using the buttons on this page.

