Mobile service
We come to you on Balboa Island
Nobody wants to wrestle a greasy grill into a car. We bring the tools, the cleaning supplies and a truck stocked with parts, and we work at your house. That covers Little Balboa Island, the Grand Canal, the North and South Bayfront, and the streets off Marine Avenue and Park Avenue.
It matters most for built-in grills. A built-in is set into a stone or stucco island, so it can't go to a shop. We clean it, fix it and test it in place.
Pro Grill started in Southern California in 2018. We have serviced over 25,000 grills, and the team has 50+ years of combined grill experience. We are insured, and we clean up what we use.
Deep cleaning
Deep grill cleaning
A deep cleaning is not a quick scrape and a wipe. We take the grill apart, clean each piece, and put it back together working. Every cleaning covers:
- Cooking grates, scrubbed and rinsed clean
- Burners, with the ports cleared so the flame burns evenly
- Heat plates or flavorizer bars
- Briquette trays and the briquettes in them
- The firebox, scraped out from the corners to the bottom
- Drip tray and grease management system
- Igniter electrodes, cleaned so they spark where they should
- The hood and the outside stainless
- Cleanup of our work area when we finish
Buildup is more than a looks problem. Old grease feeds flare-ups and can catch fire. Clogged ports give you uneven heat, with one side scorching and the other barely warm. Wet residue holds moisture against metal and speeds up rust. Burners that sit in that mess rot out sooner than they should.
Cleaning will not undo damage that has already happened, but it lets the grill run the way it was built to and shows us what needs attention.

Start with the symptom
BBQ repair for Balboa Island grills
Most repairs get done in one visit, because the truck carries common parts for burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators. These are the problems we see most near the water.
Stainless that is pitted or stained
Salt in the air eats into stainless and leaves brown spots and tiny pits. We clean off what can be cleaned, treat the surface, and tell you honestly which marks are only surface and which are permanent.
Grates rusting or flaking
Bare cast iron and plated grates rust quickly in damp, salty air, and flakes end up on your food. We clean and assess them, and replace grates that are past saving.
Burners rusted through
A burner that has holes or crumbling edges throws a ragged flame and can burn back into the tube. We replace it with the right burner for your model.
Knobs and valve stems seized
Corrosion locks up a knob or the valve stem behind it. We free it up where we can, and replace the valve or knob when it is damaged or the gas won't shut off cleanly.
Igniter clicks but won't light
Usually the electrode tip is corroded or coated with grease, or the spark is landing in the wrong place. We clean or replace the electrode, check the wire and module, and test it until it lights every time.
Won't get past 300 degrees
Common causes are a regulator that has gone into low-flow mode, clogged burner ports, or a bad hose or valve. We test the gas supply and the burners to find out which, then repair that part.
Yellow, lazy flames
A healthy flame is mostly blue and steady. Yellow or flickering flames usually mean blocked ports, debris or a nest in the venturi tube, or a bad air mix. We clear the blockage and adjust the burner.
Smells like gas
Shut the gas off at the tank or the supply valve and do not light the grill until it has been checked. We find the leak, which is often a hose, fitting or valve, and fix it before the grill is used again.
Repair it right
We diagnose before buying parts
One symptom can have several causes. A weak flame might be the regulator, a clogged burner or a failing valve. Replacing parts by guesswork costs you money and fixes nothing, so we check first and replace only what has failed.
It speeds things up if you take a photo of the label with the model and serial number before we arrive. On built-ins it is often inside the cabinet or under the control panel. Our truck carries parts for most brands, and the rest can be ordered through store.progrill.com.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When a single part fails on a built-in, repairing it almost always makes more sense than replacing the grill. The island, the cutout, the gas line and the counters are the expensive parts, and they stay put. A new burner, valve or igniter gets a good grill running again.
We also design, fabricate and repair outdoor kitchens. That includes the grill island, access doors, drawers and the details around them. Alongside grills, we service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and maintenance on Balboa Island
A grill inspection is a full check of gas connections, burners and ignition, finished with a written report. It suits buyers and sellers of a home, owners of a grill that has sat unused, or anyone who just wants to know what shape it is in.
Most homes should have a deep cleaning every 6 to 12 months. If you grill several times a week, go toward the shorter end.
If you would rather not keep track of it, the Protection Plan membership schedules cleanings for you, so the grill gets looked after on a regular rhythm.
Wear and tear
What wears grills out on the water
Balboa Island sits in the bay, close to the ocean, and salt air is the main enemy of a grill here. It rusts burners and grates faster, pits stainless, and corrodes igniter tips and the screws and hinges on the hood.
A grill used often and wiped down is in better shape than one left alone, but even a covered grill is exposed. Regular cleaning catches corrosion early, when the fix is a small part rather than a big one.
When it's time to replace
New grills, measured, installed and hauled away
Sometimes a grill is past repair, or the cost of fixing it adds up to more than it is worth. When that is the case, we say so plainly.
If you want a new one, we measure the cutout or the space, sell you a grill that fits, install it, and haul the old grill away.

What to expect
What a visit looks like
- You book online and tell us what the grill is doing and what kind it is.
- The technician arrives at your home in Balboa Island and looks the grill over first.
- We explain what we found and what it needs before starting work.
- We clean, repair or both, using parts from the truck when we have them.
- We test the grill, light it, and check the flame.
- We clean up our work area, and you get the grill back.
Our work is backed by 2,500+ five-star reviews from Google, Yelp and Facebook. Pick a time online and we will come to you.

