Wear and tear
We come to you in Sunset Beach
Pro Grill started in Southern California in 2018 and has serviced over 25,000 grills. Our technicians drive to your house with the tools and parts, and the cleaning or repair is done right where the grill sits.
Nobody has to haul a greasy grill into a truck. That matters most for built-ins, which are bolted into an island and can't go anywhere. We also work on freestanding carts and portable units, and we cover Sunset Beach along with nearby Surfside Colony, Huntington Harbour, Bolsa Chica, Old Town Seal Beach and Leisure World in Seal Beach.
The team has 50+ years of combined grill experience, and we're insured. We have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep grill cleaning, start to finish
A deep cleaning goes well past a quick scrape of the grates. We take the grill apart, clean each piece and put it back together working. Here is what's included:
- Cooking grates, scrubbed and rinsed
- Burners, cleaned and the ports cleared
- Heat plates or flavorizer bars
- Briquette trays
- Firebox, scraped out from top to bottom
- Drip tray and grease management system
- Igniter electrodes, cleaned and tested
- Hood interior and the outside stainless
- Cleanup of our work area when we're done
Buildup does real damage over time. Grease in the firebox feeds flare-ups. Clogged burner ports give you uneven heat, with one side scorching and the other barely warm. Wet, greasy residue holds moisture against metal and speeds up rust. Left long enough, it rots burners out from the inside, and replacing them costs far more than regular cleaning.

Start with the symptom
BBQ repair in Sunset Beach
Most grill problems come down to a worn part or a dirty one. These are the ones we see most often, and we can usually fix them during the visit.
Pitted or stained stainless
Salt and moisture eat into the finish, especially on hoods and side shelves. We clean and polish what can be saved, and tell you straight when a panel is past it.
Rusting or flaking grates
Rust flakes off onto food and the grate loses its shape. Light rust cleans up. Grates that are flaking or thin get replaced with the right size for your model.
Burner rusted through
Salt air corrodes burner tubes from the outside while grease works on them from the inside. Holes and cracks show up as ragged flames or a flame that won't spread. We swap in a matching burner.
Igniter clicks but won't light
The usual culprits are a corroded electrode tip, a loose wire or a weak module. We clean the electrode, test the spark and replace whatever failed.
Knobs seized or stuck
Rust and baked-on grease lock up knobs and valve stems. We free what we can, and replace the valve if it won't turn smoothly or leaks.
Yellow, lazy flames
A healthy flame is mostly blue. Yellow flames point to blocked ports, a bad air mix or a failing regulator, and we trace which one.
Smells like gas
Shut the gas off at the tank or the line and don't light the grill until it's been checked. We test the hose, fittings, valves and regulator, and fix the leak.
Repair it right
We diagnose before we buy parts
The same symptom can have several causes. A weak flame might be a clogged port, a bad regulator or a failing valve. If we guessed and ordered parts, you'd pay for the wrong one.
So we check first: gas supply, burners, valves and ignition. Then we tell you what's wrong and what it will take to fix it.
It speeds things up if you text us a photo of the model and serial number label before we come. It's usually on the frame, inside a cabinet door or on the back panel. Our truck carries parts for most brands, and more are available at store.progrill.com if you'd rather order a part yourself.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens in Sunset Beach
When one part fails on a built-in, repairing it almost always makes more sense than tearing out the island. The cutout, the gas line and the countertop all stay as they are, and you replace only the burner, valve or igniter that gave out.
We also design, fabricate and repair outdoor kitchens, from a single grill and counter to a full run of cabinets, side burners and storage. And we don't stop at gas grills. Our technicians service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas connections, burners and ignition, finished with a written report. It's useful before a big cookout, when you've bought a house with a grill already in the yard, or when something just seems off.
Most homes do well with a deep cleaning every 6 to 12 months. If you grill several times a week, plan on the shorter end.
The Protection Plan is a membership that puts scheduled cleanings on the calendar, so you don't have to remember. Ask us about it when you book.
Wear and tear
What wears grills out in Sunset Beach
The ocean is close, and salt air is hard on grills. It rusts burners, grates and hinges faster than inland air does, and it corrodes the tips of igniter electrodes until the spark weakens or quits.
Stainless that isn't wiped down regularly will pit and stain, and a grill cover helps but doesn't stop it. Regular cleaning, plus a look at the burners and electrodes, catches most of this before parts fail.
When it's time to replace
New grill? We measure, install and haul away the old one
Sometimes repair stops making sense, like when the firebox has rusted out or parts cost more than the grill is worth. We'll say so plainly.
If you decide to replace it, we measure the cutout or the space, sell you a grill that fits, install it and haul the old one away.

What to expect
What a visit looks like
- You book online and tell us what the grill is doing.
- A technician arrives in the window we gave you.
- We look the grill over and check gas and ignition.
- We explain what we found and what we recommend.
- We clean, repair or both, with your OK.
- We test the grill, clean up our work area and walk you through what we did.

