Mobile service
We Come to You in Temple City
Our technicians drive to your house in Temple City and work on the grill where it sits, in the backyard or on the patio. Nobody has to wrestle a greasy grill into a truck or a trunk.
This matters most for built-ins. A grill set into a stone or stucco island is not going anywhere, and it does not need to. We bring the brushes, tools, drop cloths and common parts, and do the work in place.
We cover Downtown Temple City and the Las Tunas Drive corridor, the streets around Live Oak Park and Temple City Park, Cloverly, and homes along Rosemead Boulevard and Lower Azusa Road. If your street is not on that list, mention it when you book. Pro Grill has serviced more than 25,000 grills since 2018 and has 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep Grill Cleaning
A deep cleaning is a full teardown, not a quick scrape of the grates. We take the grill apart, clean each piece, and put it back together working properly. Here is what is included:
- Cooking grates, scrubbed and cleaned of baked-on carbon
- Burners, with the ports cleared so the flame is even
- Heat plates or flavorizer bars, cleaned or flagged if they are burned through
- Briquette trays and the briquettes in them
- Firebox, scraped out from the walls to the bottom
- Drip tray and grease management, including the cup or pan underneath
- Igniter electrodes, cleaned so they spark where they should
- Hood and outside stainless, wiped down and polished
- Cleanup of our work area when we finish
Buildup is more than a looks problem. Old grease feeds flare-ups and can catch fire in the firebox. Caked-on residue blocks burner ports, so the heat runs uneven with hot spots on one side and cold on the other. Moisture trapped under that crust speeds up rust, and a burner sitting in wet grease and ash rots out from the outside in. A grill that is cleaned on a schedule lasts longer and cooks more evenly. We do not promise a cleaning will make an old grill look or run like a new one, but it will be in far better shape.

Start with the symptom
BBQ Repair at Your Door
Most grill trouble comes down to a handful of parts: burners, valves, igniters, grates, heat plates, briquette trays, knobs and regulators. We fix all of them at the house. These are the problems we see most.
The igniter clicks but the grill won't light
The cause is often a dirty or misaligned electrode, a dead battery, or a failed igniter. Sometimes gas is not reaching the burner at all. We check which one before replacing anything.
Low heat or a weak flame
A bad regulator, a clogged burner or a blocked venturi tube can each starve the burners. The grill may preheat slowly or never get past medium.
Uneven or yellow flames
Yellow, lazy flames usually mean a burner is clogged or the air and gas mix is off. Flames that are strong on one end and weak on the other point to blocked ports.
Burners rusted through
When a burner has holes, cracks or flaking metal, cleaning will not save it. We replace it with the right part for your model.
Sticking or leaking valves
A knob that is stiff, or a valve that will not shut off fully, needs attention before the next cookout. If you smell gas, close the tank valve and leave the grill off until we look at it.
Worn or broken grates
Chipped porcelain, bent rods and thin, rusted grates cook badly and stick. We replace them with grates that fit your grill.
Briquette trays and heat shields
These parts take the heat and the drippings, so they burn out first. Once they are gone, flare-ups get worse and burners wear faster.
Ignition modules, rotisserie motors and lights
Dead modules, worn wiring, rotisserie motors that stall and burned-out control lights are common on built-ins. We replace the failed part and test it before we leave.
Repair it right
We Diagnose Before You Buy Parts
The same symptom can have different causes. A grill that will not light might need a new igniter, or it might need a regulator, a clean electrode or a different fix altogether. Guessing means money spent on a part that does not solve anything.
So we check first, then fix what is actually wrong. It helps if you photograph the model and serial number label before we arrive. It is usually on the frame, inside the cabinet or under the control panel. The truck carries parts for most brands, and more are available at store.progrill.com if your grill needs something we have to order.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens in Temple City
When one part fails on a built-in, repair is almost always the better choice. The island, countertop and cutout are the expensive part of the setup, and a new burner, valve or igniter keeps all of it in use. Replacing a whole grill because of one bad part rarely makes sense.
We also design, fabricate and repair outdoor kitchens, from a single grill island to a full layout with cabinets, counters and storage. Beyond gas grills, we service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and Regular Maintenance
A grill inspection is a full check of the gas connections, burners and ignition, finished with a written report. It tells you what is working, what is wearing out and what to fix first. It is useful before a big cookout, when you move into a house with a grill already in the yard, or when something just feels off.
Most homes should have a deep cleaning every 6 to 12 months. Families who grill several times a week should lean toward the short end of that range.
The Protection Plan is a membership for scheduled cleanings, so the grill gets looked after without you having to remember to call.
Wear and tear
What Wears Grills Out in Temple City
Temple City is inland, so salt air is not the main concern. Heat, dust and spiders are. Hot, dry months mean hard use, and grease and carbon bake onto the grates and firebox.
Dust and spiders also get into the venturi tubes, the small pipes that feed gas to the burners. A web or nest in there causes weak flames, flashback and burners that will not stay lit. A grill that sits unused under a loose cover gets the worst of it, so check the tubes before the first cookout of the season.
When it's time to replace
New Grills: Measured, Installed and Hauled Away
Sometimes repair does not make sense. The firebox may be rusted through, the parts may be gone, or the repair bill would come close to a new grill. In that case we measure your cutout, sell you a new grill that fits, install it, and haul the old one away.

What to expect
What a Visit Looks Like
- We confirm the time and what the grill needs when you book.
- The technician arrives, looks over the grill and talks through the plan.
- We clean, repair or inspect on site, protecting your patio as we work.
- We test the grill, light it and check the flame.
- We clean up our work area and go over what we found, with a written report if you booked an inspection.

