Mobile service
We Come to Your Arcadia Home
A Pro Grill technician pulls up to your house, works at the grill where it stands, and leaves it clean or fixed before driving off. Nothing gets loaded into a truck bed and nothing greasy rides in your trunk.
This matters most for built-in grills, which are set into masonry and are not going anywhere. It also matters for freestanding grills on heavy carts with a propane tank underneath. We work in Santa Anita Oaks, Highland Oaks, Hugo Reid, Rancho Santa Anita, Santa Anita Village, Camino Grove, Baldwin Stocker, Downtown Arcadia and the streets around them.
We have 2,500+ five-star reviews (Google, Yelp and Facebook) and a team with 50+ years of combined grill experience. Use the booking button on this page to pick a day.
Deep cleaning
Deep Grill Cleaning
A deep cleaning is a full teardown, not a wipe-down. Every part that touches fire, grease or food gets taken out, scraped, washed and put back in order. Here is what is included:
- Cooking grates, scrubbed and rinsed
- Burners, cleaned and checked for clogged ports
- Heat plates or flavorizer bars
- Briquette or ceramic trays
- Firebox, scraped out from top to bottom
- Drip tray and grease management, emptied and cleaned
- Igniter electrodes, cleaned so the spark reaches the burner
- Hood and outside stainless, wiped and polished
- Cleanup of our work area when we finish
Buildup is more than a looks problem. Grease that sits in the firebox feeds flare-ups. Clogged burner ports give you hot spots and cold corners. Moisture trapped under old residue starts rust, and burners that stay coated in grease rot out sooner than they should. A grill that gets cleaned on a schedule lasts longer and cooks more evenly.

Start with the symptom
BBQ Repair in Arcadia
Most grill problems come down to a handful of parts: burners, valves, igniters, grates, heat shields and regulators. We repair all of them on site, on gas grills of most brands. Here are the calls we get most.
Igniter clicks but the grill won't light
The cause is often a dirty or misaligned electrode, a dead battery, or a failed ignition module. Gas supply and the regulator get checked too.
Low heat
If the flames are weak even with the knobs on high, the regulator is the usual suspect. A blocked orifice or a partly closed tank valve can do the same thing.
Uneven or yellow flames
Flames should be mostly blue and steady. Yellow, lazy or patchy flames point to clogged burner ports or a blocked venturi tube.
Burners rusted through
Holes, flaking metal and flames that jump out of the wrong places mean the burner is done. We replace it with the right fit for your model.
Sticking or leaking valves
A knob that is stiff, gritty or won't shut off fully needs attention. A valve that leaks gas is a safety problem and should not wait.
Worn grates
Pitted, cracked or warped grates let food stick and drop through. New grates in stainless, cast iron or porcelain-coated steel go in quickly.
Briquette trays and heat shields
These take the drippings and the direct heat, so they burn through first. Replacing them protects the burners underneath.
Ignition modules and wiring
If the electrodes are clean and the battery is fresh but there is still no spark, the module or a wire is likely failing. We test it before replacing anything.
Rotisserie motors and grill lights
A rotisserie that stalls or a light that won't come on is usually a motor, switch or connection. We repair these as well.
Repair it right
We Diagnose Before You Buy Parts
The same symptom can come from different problems. A grill that runs cold might have a bad regulator, a clogged burner or a spider nest in the venturi. Guessing means paying for a part that doesn't fix anything, so we test first and replace only what has failed.
When you book, take a photo of the label on your grill with the model and serial number. It is usually on the frame, inside a cabinet door or on the back panel. With that in hand we can bring the right parts. Our truck carries parts for most brands, and more are available at store.progrill.com for built-in grills.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens
When one part fails on a built-in, replacing the whole grill is rarely the answer. The island, the countertop and the gas line were built around that grill. A new burner, valve or igniter costs far less than tearing out stone and starting over, and the grill goes back to work.
We also design, fabricate and repair outdoor kitchens: islands, cutouts, doors, drawers and the appliances that go in them. If your kitchen has a worn-out piece or you want to add one, we can look at what you have.
The grill is not the only thing we service. Our technicians also work on smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and Maintenance in Arcadia
An inspection is a full check of the gas connections, hoses, regulator, burners and ignition. You get a written report that lists what is in good shape, what is wearing and what needs work, so you know where the grill stands before the next cookout. It is also a useful document if you are buying or selling a house with an outdoor kitchen.
Most homes should have the grill deep cleaned every 6 to 12 months. If you grill several times a week, lean toward every 6 months, or sooner. If it only comes out on holidays, once a year is enough.
The Protection Plan is a membership for scheduled cleanings. We put you on the calendar, come out at the interval you picked, and you skip the remembering.
Wear and tear
What Wears Grills Out in Arcadia
Arcadia is inland, so salt air is not what hits grills here. Heat, dust and spiders are. Long dry stretches bake grease onto grates and heat plates until it turns hard and crusty, and fine dust settles into burner ports and control panels.
Spiders also like the venturi tubes, the short pipes that feed gas to each burner. A nest in one of them blocks the flow and gives you yellow flames, weak heat, or fire coming out the back of the burner. If your grill has been sitting idle, clearing the tubes is one of the first things we check.
When it's time to replace
New Grills: Measured, Installed, Old One Hauled Away
Sometimes repair stops making sense: the firebox has rusted through, the frame is bent, or parts for an old model no longer exist. When that happens we sell you a new grill. For built-ins we measure the cutout first so the new unit fits the opening.
We install it, connect the gas, test it and haul the old grill away. You do not have to find a way to get rid of it.

What to expect
What a Visit Looks Like
- You book a day, and we confirm the details, including your grill's brand and what it is doing.
- The technician arrives, looks at the grill and checks the gas and ignition.
- Cleaning or repair gets done at your home, with cleaning and repair combined into a single visit when you need both.
- We test the grill, light it and make sure every burner works.
- We clean up our work area and go over what we found, with a written report if you ordered an inspection.

