Mobile service
We Come to You in Azusa
Pro Grill is a mobile BBQ cleaning and repair company. Our technicians drive to homes across Azusa, including Downtown Azusa, Rosedale, Azusa Greens, and the north, south and west sides of town. We have worked on grills since 2018 and have serviced over 25,000 of them. The team has 50+ years of combined grill experience, and we have 2,500+ five-star reviews (Google, Yelp and Facebook).
The work happens where the grill sits: on the patio, beside the pool, or in the island. Nobody has to wrestle a greasy grill into a trunk or leave it at a shop for a week.
This matters most for built-ins. They are set into masonry or steel frames and are not going anywhere, so a technician who comes to the yard is the practical way to get one serviced. We bring our tools, cleaning supplies and a truck stocked with common parts, and we are insured.
Deep cleaning
Deep Grill Cleaning, Start to Finish
A deep cleaning is more than a scrape and a wipe. We take the grill apart, clean each piece, and put it back together so it lights and cooks the way it should. Here is what is included:
- Cooking grates, scrubbed and rinsed
- Burners, cleared of debris and clogged ports
- Heat plates or flavorizer bars
- Briquette trays and briquettes
- Firebox, scraped out from the bottom up
- Drip tray and grease management system
- Igniter electrodes, cleaned and checked
- Hood interior and the outside stainless steel
- Cleanup of our work area when we finish
Buildup is not just a cosmetic problem. Old grease feeds flare-ups and can catch fire inside the cabinet. Carbon and drippings block burner ports, which gives you uneven heat and hot spots. Trapped moisture and grease speed up rust, and burners that sit in that mess rot out sooner than they should. A cleaned grill is safer and easier to cook on, and its parts last longer.

Start with the symptom
BBQ Repair at Your Azusa Home
Most grill problems come down to a handful of parts. We repair burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators, usually on the same visit when the part is on the truck. These are the problems we see most.
The igniter clicks but the grill won't light
The cause is usually a dead electrode, a loose or corroded wire, a worn module or a dead battery. Gas supply or a regulator issue can look the same, so we test before replacing anything.
Low heat, even with the knobs on high
A grill that never gets hot enough often has a regulator that has tripped or failed, or burners clogged with debris. Sometimes it is a bent hose or a partly closed tank valve.
Uneven or yellow flames
Yellow, lazy flames point to blocked ports or an air mixture problem. A burner that burns hot on one end and weak on the other needs cleaning or replacing.
Burners rusted through
Holes, flaking metal and flames coming from the wrong spots mean the burner is finished. We fit a matching burner and check the rest of the gas path while we are in there.
Sticking or leaking valves
A knob that is stiff, will not turn, or leaves a gas smell needs attention before the next cookout. We replace the valve or the control as needed and leak-test the connection afterward.
Worn or rusted grates
Flaking porcelain, thin cast iron and bent stainless rods do not hold heat or release food. New grates cost far less than a new grill.
Briquette trays and heat shields
Heat plates, briquette trays and shields take the drippings and the flame, so they burn out first. Replacing them brings back even heat and keeps grease off the burners.
Ignition modules, rotisserie motors and lights
Electronic parts fail too. We replace ignition modules, rotisserie motors and control panel lights on most built-in models.
Repair it right
We Diagnose Before We Buy Parts
The same symptom can come from several causes. A grill that will not light might need an igniter, a module, a regulator or just a good cleaning. Guessing means paying for parts you did not need, so we check the grill first and then fix what is actually wrong.
If you can, take a photo of the label with the model and serial number and send it when you book. It is usually on the frame, inside the cabinet door or on the back. That lets us bring the right parts the first time. Our truck carries parts for most brands, and more are available at store.progrill.com when a part needs to be ordered.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens
A built-in grill is usually worth repairing, not replacing, when one part fails. The cutout, the island and the gas line are already built around it, and a new burner, valve or igniter costs far less than redoing the structure. We tell you straight when a repair makes sense and when it does not.
We also design, fabricate and repair outdoor kitchens: islands, counters, doors, drawers and the appliances inside them. If a cabinet door has warped or a storage drawer no longer closes, we can fix that on the same visit as the grill.
Grills are not all we work on. We also service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and Regular Maintenance
A grill inspection is a full check of the gas connections, burners and ignition, finished with a written report. It is useful before the season starts, after a grill has sat unused, or when you are buying a home with a built-in and want to know what shape it is in.
Most homes should have a deep cleaning every 6 to 12 months. If you grill several times a week, cook fatty cuts or use the grill year-round, plan on the shorter end of that range.
The Protection Plan membership covers scheduled cleanings, so the work gets done on a regular timetable and you do not have to remember to book it.
Wear and tear
What Wears Grills Out in Azusa
Azusa is inland, so the usual trouble is not salt air. It is heat, dust and spiders. Grills here run hard in long hot stretches, and dust settles into the cabinet and onto the burners.
Spiders like to build nests in venturi tubes, the small tubes that feed gas to the burners. A blocked tube causes weak, uneven or yellow flames, and can make flames flash back toward the knobs. Cleaning out the tubes is a routine part of our service, and a grill that has sat under a cover through summer is the most likely to need it.
When it's time to replace
When a New Grill Makes Sense
Sometimes repair does not make sense. The firebox may be rusted through, or parts may no longer be made. When that happens, we measure the cutout, help you choose a grill that fits, sell it and install it. We haul the old grill away when we leave.

What to expect
What a Visit Looks Like
- A technician arrives at the time you booked and looks the grill over.
- We tell you what we found and what we recommend before any work begins.
- We clean, repair or both, using parts from the truck when we have them.
- We test the ignition, flame and gas connections.
- We clean up our work area and go over what we did with you.

