Mobile service
We Come to Your Home in La Puente
Pro Grill is a mobile BBQ cleaning and repair company. Our technician drives to your house, works on the grill where it sits, and leaves the area clean. Nothing gets loaded into a truck and taken to a shop, and nothing sits there for a week.
This matters most for built-in grills. They are plumbed to gas and set into masonry, so they are not going anywhere. Freestanding carts are just as easy. We work on the patio, the driveway or the side yard.
We cover La Puente and the neighboring communities, including Bassett, Valinda, Avocado Heights, Hacienda Heights, Rowland Heights, City of Industry and West Covina. We have been at it since 2018 and have serviced over 25,000 grills. We have 2,500+ five-star reviews (Google, Yelp and Facebook), and the team has 50+ years of combined grill experience. We are insured.
Deep cleaning
Deep Grill Cleaning
A deep cleaning is not a quick scrape of the grates. We take the grill apart, clean each piece, and put it back together. Here is what is included:
- Cooking grates, scrubbed and rinsed
- Burners, cleaned and cleared of blocked ports
- Heat plates or flavorizer bars
- Briquette trays and any ceramic or lava rock
- Firebox, scraped down to bare metal where grease has baked on
- Drip tray and grease management system
- Igniter electrodes, cleaned so they spark where they should
- Hood interior and outside stainless, wiped and polished
- Cleanup of our work area when we finish
Buildup is more than a looks problem. Old grease feeds flare-ups and can catch fire inside the firebox. Caked-on residue blocks burner ports, which gives you uneven heat and hot spots. Moisture trapped under that crust starts rust, and burners that sit in grease and ash rot out from the outside in. A cleaning slows all of that down. It does not undo damage that is already there, and we will tell you if a part is past saving.

Start with the symptom
BBQ Repair in La Puente
We repair burners, valves, igniters, grates, briquette trays, heat plates, knobs and regulators on gas grills. These are the problems we are called for most.
Igniter clicks but the grill won't light
The usual causes are a dead battery, a dirty or corroded electrode, a loose wire, or a failed ignition module. We test each one in order.
Low heat or weak flames
A grill that used to roar and now barely reaches 300 degrees often has a regulator problem or a clogged burner. A tripped safety flow device in the regulator is a common cause.
Uneven or yellow flames
Yellow, lazy flames mean the gas and air are out of balance. Spider webs in the venturi tubes, blocked ports or a bent burner are the likely reasons.
Burners rusted through
Holes along the burner, or flames shooting from places they should not, mean it is done. We replace it with a burner that fits your model.
Sticking or leaking valves
A knob that is stiff or does not shut off fully needs attention. A valve that leaks gas needs it right away, so stop using the grill and book a visit.
Worn or broken grates
Flaking porcelain, bent rods and cracked cast iron all make food stick and cook unevenly. We replace them with grates cut for your grill.
Briquette trays and heat shields
These take the drippings and the heat, and they are the first parts to burn through. When they go, grease reaches the burners and flare-ups get worse.
Ignition modules, rotisserie motors and lights
Electrical parts fail too. We replace modules, rotisserie motors and burner or hood lights.
Repair it right
We Diagnose Before You Buy Parts
One symptom can have several causes. A grill that will not stay lit might need a new regulator, a cleaned burner, or nothing more than a new battery. If you guess and order parts online, you can spend money and still have a grill that does not work.
We check first and replace only what has failed. Our trucks carry parts for most brands, so many repairs are finished on the first visit. If a part has to be ordered, more are available at store.progrill.com.
When you book, send us a photo of the label with the model and serial number. It is usually on the back or side of the cart, or inside the cabinet or door on a built-in. With that number we can bring the right parts.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens
When one part fails on a built-in grill, repair is usually the better move. The grill is part of the island, and replacing the whole unit can mean new cutouts and masonry work. A new burner, valve or igniter costs far less than that, and the grill goes back to work.
We also design, fabricate and repair outdoor kitchens: islands, counters, doors, drawers and the appliances built into them. If your outdoor kitchen has a failing part or needs a rebuild, we can look at it during a repair visit.
Grills are not all we work on. We also service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and Regular Maintenance
A grill inspection is a full check of the gas connections, burners and ignition, with a written report. You get a record of what is working, what is wearing out and what to watch. It is useful before the season starts, before you sell a house, or when you have bought a home with a grill and do not know its history.
Most homes should have the grill cleaned every 6 to 12 months. If you grill several times a week, plan on the shorter end.
If you would rather not keep track, the Protection Plan membership schedules cleanings for you, so the grill gets serviced on a regular cycle.
Wear and tear
What Wears Grills Out in La Puente
La Puente is inland, so the trouble is heat, dust and spiders. Long hot stretches bake grease onto the firebox and dry out gaskets, knobs and igniter wires. Dust settles on a grill that sits uncovered between cookouts and mixes with grease.
Spiders are the other regular culprit. They build webs in the venturi tubes, the small pipes that feed gas to the burners. A blocked tube gives you yellow flames, weak heat, or fire burning back at the knobs. We clear them as part of a cleaning, and a cover helps keep them out.
When it's time to replace
When It's Time for a New Grill
Some grills are not worth another repair. The firebox may be rusted through, the frame may be failing, or parts may no longer be made. We will tell you plainly when that is the case.
When you need a new grill, we sell new ones, measure the cutout for a built-in so it fits, install it, and haul the old grill away. You do not need to find a truck or arrange a dump run.

What to expect
What a Visit Looks Like
- You book online and tell us what the grill is doing. Send the model and serial number photo if you can.
- The technician arrives in the window we gave you and looks at the grill.
- We explain what we found and what it needs before any work begins.
- We clean, repair or both, using parts from the truck when we have them.
- We test the grill, clean up our work area and go over what we did.

