Mobile service
We Come to Your Home in Walnut
Our technicians drive to your house and work on the grill where it sits. Nothing gets loaded into a truck bed, nothing drips grease through your garage, and you don't spend a week without a grill.
We cover Snow Creek, Lemon Creek, Walnut Hills, Suzanne Park, Creekside and Meadow Pass, plus the streets around them. Pro Grill has been working in Southern California and Arizona since 2018, we've serviced more than 25,000 grills, and we're insured.
Built-in grills are the easiest case to explain. A built-in is set into masonry or a stainless frame and isn't going anywhere, so cleaning and repair have to happen on site. Freestanding carts and portable units get the same service on the patio or driveway.
Deep cleaning
Deep Grill Cleaning
A deep clean is a full teardown, not a quick scrub of the top grates. We take the grill apart, clean each piece, and put it back together working properly. Every cleaning includes:
- Cooking grates, scraped and cleaned on both sides
- Burners, with ports cleared and tubes checked
- Heat plates or flavorizer bars
- Briquette trays and briquettes
- Firebox, scraped down to bare metal where buildup has baked on
- Drip tray and grease management system, emptied and cleaned
- Igniter electrodes, cleaned and tested
- Hood and outside stainless, cleaned and wiped down
- Cleanup of our work area when we're done
Buildup does more than look bad. Grease and carbon in the firebox feed flare-ups. Clogged burner ports give you uneven heat, with one side scorching and the other barely warm. Moisture trapped under baked-on residue speeds up rust, and burners that sit coated in drippings rot out from the outside in. A grill that gets cleaned on a schedule keeps its burners longer.

Start with the symptom
BBQ Repair
Most grill problems come down to a handful of parts. We repair gas grills of all types, and these are the calls we get most often in Walnut.
Igniter clicks but the grill won't light
Usually a dirty or misaligned electrode, a dead battery, a failed ignition module, or a wire that has corroded. We test each one before replacing anything.
Low heat or weak flame
Often a regulator that has tripped its safety flow limit, a blocked burner port, or a kinked hose. Sometimes it's just a tank that's nearly empty, and we'll tell you if so.
Uneven or yellow flames
Flames should be mostly blue. Yellow tips and hot spots point to spider webs or debris in the venturi tubes, or burner ports clogged with residue.
Burners rusted through
Holes, flaking metal and ports that no longer light mean the burner is finished. We replace burners with the correct fit for your model rather than a loose universal part.
Sticking or leaking valves
A knob that's hard to turn or a faint gas smell at the control panel needs attention right away. We check connections and replace valves that no longer seal.
Worn or rusted grates
Cracked porcelain, thinning cast iron and bent rods hold food badly and flake into it. New grates are a straightforward swap.
Briquette trays and heat shields
These take the drippings and the direct heat, so they burn through first. When they go, grease reaches the burners and flare-ups follow.
Ignition modules, knobs and regulators
Cracked knobs, a regulator that hisses or surges, and modules that stop sparking are all replaced at your home.
Rotisserie motors and grill lights
If the spit won't turn or the interior lights have gone dark, we can usually trace it to the motor, a connection or a transformer.
Repair it right
We Diagnose Before You Buy Parts
The same symptom can come from several causes. A grill that won't light might need a new igniter, or it might need a cleaned electrode or a fresh battery. Guessing means paying for parts you didn't need, so we check first and then tell you what's wrong.
To speed things up, take a photo of the label with the model and serial number and send it when you book. It's usually on the frame, inside a cabinet door or near the gas connection. With the model in hand we can plan for the right parts before we arrive.
Our truck carries parts for most brands, so many repairs are finished in one visit. Parts for most built-in grills are also available at store.progrill.com, including items for older models.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens in Walnut
When one part fails on a built-in, repair is usually the smarter move. The island, the countertop and the gas line are all built around that grill, and replacing the whole unit means cutting into masonry for something a new burner or valve would fix. We repair the part and leave the kitchen alone.
We also design, fabricate and repair outdoor kitchens. That covers islands, counters, doors, drawers, side burners and the gas and electrical connections that serve them.
Beyond gas grills, our technicians work on smokers, griddles, pizza ovens, fireplaces and fire pits. With 50+ years of combined grill experience on the team, most of what sits in a backyard is familiar to us.

Inspections & maintenance
Inspections and Regular Maintenance
A grill inspection is a full check of the gas connections, burners and ignition system. You get a written report listing what's in good shape, what's wearing and what needs replacing. It's useful if you're buying a home with a built-in, planning a party season, or just want to know what you have.
Most homes should have a deep cleaning every 6 to 12 months. If you grill several times a week, lean toward the shorter end of that range.
The Protection Plan is a membership that puts scheduled cleanings on the calendar, so you don't have to remember. Ask when you book and we'll explain how it works.
Wear and tear
What Wears Grills Out in Walnut
Walnut is inland, so salt air isn't the issue. The usual trouble is heat and dust. Long hot stretches bake grease onto grates and heat plates, and dust settles into the burners and cabinets of a grill that sits uncovered.
Spiders are the other regular culprit. They build webs in the venturi tubes, which are the small pipes that feed gas to the burners, and a blocked tube causes yellow flames, uneven heat and sometimes flashback. A cover helps, and so does a yearly cleaning.
When it's time to replace
New Grills: Measured, Installed, Old One Hauled Away
Sometimes repair doesn't make sense. The firebox has rusted through, the parts are discontinued, or the repair costs would pass the value of the grill. When that's the case, we'll say so plainly.
For a replacement, we measure your cutout so the new grill fits, sell you the grill, install it and haul the old one away. You don't have to coordinate a delivery, a gas fitter and a dump run.

What to expect
What a Visit Looks Like
- You book online and tell us the brand, the model if you have it, and what's going wrong.
- The technician arrives in the window we gave you and looks over the grill.
- We explain what we found before any work starts.
- We clean, repair or both, using parts from the truck when we have them.
- We test the grill, clean up our work area and go over what we did.
Our work is backed by 2,500+ five-star reviews (Google, Yelp and Facebook). Book a visit for your Walnut home and we'll get your grill running right.

