Start with the symptom
Grill cleaning and repair at your Pomona home
Pro Grill is a mobile service. The technician pulls up, sets up next to your grill and does the work there. Nothing goes in a trunk, and you don't haul a greasy grill to a shop and wait for a call.
That matters most for built-ins. A grill set into a stone or stucco island isn't going anywhere, so the work has to happen where it stands. We cover Downtown Pomona and the Arts Colony, Phillips Ranch, Ganesha Hills, Lincoln Park, Westmont and the streets around them. We have been at this since 2018, have serviced more than 25,000 grills, and have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep cleaning, piece by piece
A deep clean is more than a scrape of the grates. We take the grill apart, clean each part and put it back together. Every visit covers:
- Cooking grates, scrubbed and rinsed
- Burners, with the ports cleared and the tubes checked
- Heat plates or flavorizer bars
- Briquette or ceramic trays
- The firebox, scraped out
- Drip tray and grease management, including the cup and the grease path
- Igniter electrodes, cleaned and tested
- Hood and outside stainless, wiped down and polished
- Cleanup of our work area when we finish
Grease and carbon do real damage. Old grease feeds flare-ups. Clogged burner ports give you hot and cold spots across the grates. Moisture trapped under residue speeds up rust, and burners that sit in that mess rot out sooner than they should.
A cleaning won't save a burner that is already failing. It does show us what is worn, and it slows the next failure down.

Start with the symptom
BBQ repair for the usual failures
We repair burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators, on most brands. These are the problems we see most often.
Igniter clicks but the grill won't light
Common causes are a dead electrode, a loose or corroded wire, or a burner tube blocked by webs. We test the spark and the gas path, then replace only what failed.
Low heat with the knobs on high
This usually points to a regulator that has gone weak, a partly clogged burner, or a valve that isn't opening fully. Each one has a different fix.
Uneven or yellow flames
Yellow tips mean the gas isn't mixing with enough air. Debris, spider webs in the venturi tubes and plugged ports are the usual reasons.
Burners rusted through
Holes, flaking metal and flames that jump out of the wrong spots mean the burner is done. We fit a replacement made for your model.
Sticking or leaking valves
A knob that is stiff or won't turn needs attention. If you smell gas, shut it off at the tank or the line first, then book a visit. We replace the valve and leak-test the connections.
Worn grates
Thin rods, broken welds and rust that flakes into the food are all reasons to swap grates. We match the size and material to your grill.
Briquette trays and heat shields
Burned-through heat plates and crumbling briquettes cause hot spots and let grease reach the burners. New ones bring the heat back to an even spread.
Ignition modules and wiring
If the electrodes are good and there is still no spark, the module or the wiring is next. We trace it before replacing anything.
Repair it right
We diagnose first, then buy parts
The same symptom can come from several different causes. A grill that won't light might need an electrode, a module, a regulator or just clean burner tubes. Guessing means paying for parts you didn't need, so we check first.
When you book, take a photo of the label with the model and serial number. It is usually on the frame, inside a cabinet door or on the back panel. With that in hand, we can arrive knowing what your grill uses.
Our trucks carry parts for most brands, so many repairs are finished during the visit. Parts for most built-in grills are also sold at store.progrill.com if you'd rather order ahead.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens in Pomona
When one part fails on a built-in, repair almost always makes more sense than replacing the grill. The cutout, the gas line and the stonework around it were built for that grill. A new burner or valve costs far less than tearing out a counter.
We also design, fabricate and repair outdoor kitchens: islands, counters, doors, drawers and the appliances inside them. If the grill is fine but the cabinet, the side burner or the drawers are not, we handle that too.
The same technicians work on smokers, griddles, pizza ovens, fireplaces and fire pits. If it burns gas or wood in your backyard, ask us about it.

Inspections & maintenance
Inspections and regular maintenance
An inspection is a full check of the gas connections, hoses, regulator, burners and ignition, finished with a written report. It tells you what is fine, what is wearing and what needs work, which is useful before a big cookout, after a grill has sat unused, or when you are deciding between repair and replacement.
Most homes do well with a cleaning every 6 to 12 months. If you grill several times a week, plan on the shorter end.
The Protection Plan is a membership for scheduled cleanings. We set the visits up in advance so the grill gets cleaned on a regular schedule without you having to remember.
Wear and tear
What wears grills out in Pomona
Pomona is inland, so salt air isn't the main problem. Heat and dust are. Grills here get a lot of use, and grease bakes onto burners, trays and heat plates until the ports clog and the metal thins.
Spiders are the other regular culprit. They build webs inside the venturi tubes, which block the gas and air mix and cause weak flames, yellow tips and burners that won't light. Clearing those tubes is a standard part of our cleaning.
When it's time to replace
New grills, measured, installed and hauled away
Sometimes repair doesn't make sense, such as when the firebox has rusted out or parts are no longer made. In that case we sell new grills, measure the cutout so it fits, install it and haul the old grill away.
You don't have to find a truck, disconnect the gas yourself or work out whether the new grill will fit the opening.

What to expect
What a visit looks like
- You book online and send a photo of the model and serial label if you have it.
- The technician arrives in the scheduled window and looks over the grill with you.
- We explain what we found and what we recommend, then do the work.
- Parts that are on the truck go in the same visit.
- We clean up our work area before we leave.
- You get the grill back running, plus a written report if you booked an inspection.

