Mobile service
We come to you in Glendora
Pro Grill is a mobile service. A technician drives to your house, works on the grill where it stands, and packs up when it's done. You don't load a greasy grill into a car, and you don't wait on a shop's schedule.
We work in Glendora Village, North Glendora, South Glendora, East Glendora, West Glendora, Big Dalton Canyon and the streets around them. If your address is in Glendora, book a visit and we'll come to you.
Built-in grills are where this matters most. A built-in is set into a masonry or stainless island and can't go anywhere, so the work has to happen at your house. Freestanding gas grills, portable units and charcoal grills get the same treatment on the patio or the side yard.
We have serviced over 25,000 grills since 2018, and the team has 50+ years of combined grill experience. We're insured, and we have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep grill cleaning, done at your home
A deep clean is more than a scrape and a wipe. We take the grill apart, clean each piece, and put it back together so it works the way it should. Here is what's included:
- Cooking grates, scrubbed and cleaned of carbon
- Burners, cleaned and checked for clogged ports and rust
- Heat plates or flavorizer bars
- Briquette trays
- Firebox, scraped out from the bottom up
- Drip tray and grease management system
- Igniter electrodes, cleaned and checked
- Hood interior and outside stainless steel
- Cleanup of our work area when we finish
Buildup is not just a cosmetic problem. Old grease feeds flare-ups and can catch fire in the firebox. Carbon on the heat plates and clogged burner ports give you hot spots and cold spots across the grates. Grease and moisture sitting on metal speed up rust, and burners that stay coated eventually rot out from the inside. Cleaning on a schedule is cheaper than replacing parts that were allowed to decay.

Start with the symptom
BBQ repair
Most grill trouble comes down to a handful of parts. We repair burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators, and we usually finish on the first visit. These are the problems we see most.
Igniter clicks but the grill won't light
The cause is often a dirty or misaligned electrode, a dead module, or a loose wire. Sometimes it's a gas supply issue instead, so we test before we replace anything.
Low heat or a grill that won't get hot
A weak flame can come from a failing regulator, a clogged burner, or a tripped safety valve. We check gas flow first, then the burners.
Uneven or yellow flames
Yellow, lazy flames point to blocked ports or an air mixture problem. Spiders and debris in the venturi tubes are a common cause.
Burners rusted through
When a burner has holes or flakes apart, cleaning won't fix it. We replace it with the right match for your model.
Sticking or leaking valves
A knob that is stiff or a valve that won't shut off all the way is a safety issue. We service or replace the valve and leak-test the connections.
Worn or broken grates
Pitted, warped or cracked grates make food stick and cook unevenly. We replace them with grates that fit your grill.
Briquette trays and heat shields
These parts take the drippings and the heat, so they burn through over time. Replacing them protects the burners underneath.
Ignition modules and lights
Dead battery modules, dim control panel lights and rotisserie motors that stall can all be swapped out without replacing the grill.
Repair it right
We diagnose first, then buy parts
The same symptom can have several causes. A grill that won't light might need a new igniter, or it might need a clean electrode and a tightened wire. Guessing means paying for parts you didn't need, so we test and inspect before we replace anything.
It speeds things up if you take a photo of the label on your grill showing the model and serial number. It's usually on the frame, inside a cabinet door, or near the gas connection. Send it when you book and we can plan for your grill's parts.
Our trucks carry parts for most brands, which means many repairs are done on the spot. If something has to be ordered, we can get parts for most built-in grills through store.progrill.com.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
If one part fails on a built-in, repair is usually the better choice. The grill head is tied into your island, your gas line and your countertop. Replacing a burner, valve or igniter costs far less trouble than tearing out the cutout and starting over.
We also design, fabricate and repair outdoor kitchens. That covers islands, counters, access doors, drawers and the grill itself, whether you're planning a new space or fixing an old one.
Our work goes beyond gas grills. We also service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas connections, burners and ignition system. You get a written report listing what's working, what's wearing out and what needs attention. It's useful if you're buying a house with a built-in, getting ready for a party, or wondering whether an older grill is worth keeping.
Most homes should have the grill deep cleaned every 6 to 12 months. If you grill several times a week, plan on the shorter end of that range.
The Protection Plan is a membership for scheduled cleanings. We come on a regular cycle, so you don't have to remember to call.
Wear and tear
What wears grills out in Glendora
Glendora is inland, well away from the coast, so salt air is not what hurts grills here. The usual culprits are heat, dust and spiders. Dust and debris collect in the burners, and spiders build nests in the venturi tubes, which block gas flow and cause uneven or yellow flames.
Grills that sit uncovered through long dry stretches also build up grime on grates and hoods, and dirty burners wear faster. A cover and a regular clean keep most of that in check.
When it's time to replace
New grills, measured and installed
Sometimes repair doesn't make sense, such as when the firebox has rusted through or parts for the model are no longer made. In that case we can sell you a new grill. We measure your cutout or patio space first so the grill fits, then install it and connect it. We haul the old grill away when we leave.

What to expect
What a visit looks like
- You book a time and tell us the grill's brand and model, with a photo of the label if you can.
- The technician arrives, looks over the grill and confirms the work.
- We clean, repair or inspect the grill at your home.
- Any parts we need are replaced on the truck when we carry them, or ordered when we don't.
- We test the grill, clean up our work area and go over what we found.

