Mobile service
We come to you in Diamond Bar
Pro Grill is a mobile service. A technician pulls up to your house with the tools, cleaning gear and parts, and works on the grill where it stands. Nobody hauls a greasy grill to a shop, and you don't go days without it.
This matters most for built-ins. A grill set into a stone or stucco island isn't going anywhere, and the grease and rust inside it keep building until someone cleans them out on site. Freestanding grills get the same treatment, with fewer cabinet doors to open.
We service homes across Diamond Bar, including Country Hills, Country Estates, Sycamore Canyon, Pathfinder, Summitridge, Golden Springs, Diamond Crest and Sandstone Canyon. If your street isn't named here, book anyway and we'll confirm the visit.
We have worked in Southern California and Arizona since 2018 and have serviced over 25,000 grills. Our team brings 50+ years of combined grill experience, and we have 2,500+ five-star reviews (Google, Yelp and Facebook). We are insured.
Deep cleaning
Deep grill cleaning
A deep cleaning is more than a scrape and a wipe. We take the grill apart, clean each part, and put it back together working properly. Here is what's included:
- Cooking grates, scrubbed and rinsed
- Burners, with ports cleared so the flame is even
- Heat plates or flavorizer bars
- Briquette trays and the briquettes in them
- Firebox, cleaned out down to bare metal where we can
- Drip tray and grease management system
- Igniter electrodes, cleaned so the spark is strong
- Hood, and outside stainless polished
- Cleanup of our work area when we're done
Buildup is not just ugly. Old grease feeds flare-ups, and flare-ups scorch food and the grill itself. Clogged burner ports give you hot spots and cold spots. Moisture trapped under baked-on residue speeds up rust, and burners that sit in that mess rot out sooner than they should.
Cleaning won't undo a burner that has already failed, but it shows us what needs replacing, and it stops the next part from going the same way.

Start with the symptom
BBQ repair at your Diamond Bar home
Most grill problems come down to a handful of parts, and most can be fixed in one visit. These are the ones we see most often.
Igniter clicks but the grill won't light
The cause is usually a dirty or cracked electrode, a loose wire, a dead battery, or a failing module. We test the spark first, then replace only what's actually bad.
Low heat or weak flames
A grill that can't get hot often has a regulator problem, a kinked hose, or blocked burner ports. A tripped safety valve on the regulator is another common cause.
Uneven or yellow flames
Yellow, lazy flames mean the gas and air aren't mixing right. Spider webs in the venturi tubes, clogged ports, or a worn burner are the usual reasons.
Burners rusted through
Burners are made to wear out eventually. If you see holes, flaking metal, or flames coming from places they shouldn't, we replace the burner with the right fit for your model.
Sticking or leaking valves
A knob that's hard to turn or won't shut off cleanly can mean a worn valve. If you smell gas, shut off the tank, keep flames away, and tell us when you book.
Worn or broken grates
Grates lose their coating, crack at the welds, or sag over time. We replace them with the correct size and material, whether that's cast iron, stainless or porcelain.
Briquette trays and heat shields
These parts take the most heat and drippings, so they burn through quietly. When they're gone, the burners get hit directly and heat spreads unevenly.
Ignition modules, knobs and lights
We also replace broken knobs, dead ignition modules, and the lights and rotisserie motors on built-in grills.
Repair it right
We diagnose first, then buy parts
The same symptom can come from different problems. A grill that won't light might need a new igniter, or it might need a regulator. Replacing the wrong part wastes money and leaves the grill broken.
So we check the grill first: gas supply, regulator, valves, burners and ignition. Then we tell you what's wrong and what it needs.
To speed things up, send a photo of the model and serial number label when you book. It's usually on the frame, inside a door, or near the control panel. With that, we can arrive knowing what your grill takes.
Our trucks carry parts for most brands. If something isn't on the truck, store.progrill.com stocks parts for most built-in grills, and we can order what's missing.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When one part fails on a built-in, repair is nearly always the better move. The island, the countertop and the gas line stay put, and a new burner or valve costs far less than tearing out a whole cutout.
We also design, fabricate and repair outdoor kitchens. That covers islands, countertops, doors, drawers, side burners and the gas work that connects them.
Beyond grills, we work on smokers, griddles, pizza ovens, fireplaces and fire pits. If it burns gas or wood in your backyard, ask us about it.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas connections, burners and ignition, finished with a written report. It's useful before a big cookout, when you've bought a house with a grill already in the yard, or when something just seems off.
For cleaning, most homes do well every 6 to 12 months. If you grill several times a week, plan on the shorter end of that range.
If you'd rather not keep track, the Protection Plan membership puts your cleanings on a schedule. We show up when it's due, and the grill stays in shape without you having to remember.
Wear and tear
What wears out grills in Diamond Bar
Diamond Bar is inland, so salt air isn't the concern. Heat and dust are. Long hot stretches bake grease onto grates and heat shields, and dust settles into every opening on the grill.
Spiders are the other regular problem. They build webs inside the venturi tubes, which block gas flow and cause yellow flames or a burner that won't stay lit. A grill that sits unused for a few weeks is the likeliest place to find them.
When it's time to replace
When a new grill makes more sense
Some grills aren't worth saving. A rusted-out firebox, a cracked body, or a model nobody makes parts for can leave you paying more to repair than to replace.
When that's the case, we tell you. We measure the cutout or the space, sell you a new grill that fits, install it, and haul the old one away.

What to expect
What a visit looks like
- You book online and tell us what's going on with the grill.
- A technician arrives in the window we gave you.
- We look the grill over and explain what it needs before we start.
- We clean, repair, or both, on site.
- We test the grill, clean up our work area, and go over what we did.

