Mobile service
We Come to Your Home in Whittier
Pro Grill is a mobile service. A technician drives to your house and works on the grill on your patio, in your side yard or in your outdoor kitchen. We cover Uptown Whittier, Whittwood, Friendly Hills, East Whittier, Whittier Hills, and the South Whittier and West Whittier areas.
Nobody has to load a greasy grill into a truck or find a shop that will take it. That matters most for built-ins, which are set into masonry and are not going anywhere. Freestanding carts get the same job done on a tarp beside the patio.
We have worked on more than 25,000 grills since 2018, and the team has 50+ years of combined grill experience. We are insured, and we have 2,500+ five-star reviews (Google, Yelp and Facebook).

Deep cleaning
Deep Grill Cleaning
A deep clean is not a scrub of the grates. We take the grill apart, clean each part, and put it back together so it works the way it should. Every cleaning covers:
- Cooking grates, scraped and washed
- Burners, with ports cleared so the flame is even
- Heat plates, flavorizer bars or heat tents
- Briquette trays and briquettes
- The firebox, scraped down to bare metal walls
- Drip tray and grease management, including the grease cup or catch pan
- Igniter electrodes, cleaned and checked for a good spark
- The hood interior and the outside stainless
- Cleanup of our work area when we finish
Buildup is more than a cosmetic problem. Grease and carbon in the firebox feed flare-ups. Clogged burner ports give you hot spots and cold spots. Moisture trapped under baked-on residue starts rust. Burners that sit in that mess rot out from the inside and need replacing sooner than they should.

Start with the symptom
BBQ Repair at Your Whittier Home
We repair burners, valves, igniters, grates, briquette trays, heat plates, knobs and regulators, and most of the time the fix is done on the same visit. These are the problems we see most.
The igniter clicks but the grill will not light
A weak or missing spark usually points to a dirty or cracked electrode, a worn module or a loose wire. Sometimes the gas is not reaching the burner at all. We test each possibility in turn.
Low heat or a weak flame
A failing regulator, a partly closed tank valve or blocked burners can all hold the temperature down. The fix depends on which one it is.
Uneven or yellow flames
Yellow, lazy flames mean the gas and air are not mixing properly. Common causes are debris or spider webs in the venturi tubes, clogged ports and worn burners.
Burners rusted through
Holes, flaking metal and flames that jump out of the wrong spots mean the burner is finished. We replace it with a correct-fit burner and clean the area around it.
Sticking or leaking valves
A knob that is stiff, slips or will not shut off fully needs attention. If you smell gas, turn off the tank and keep flames away until we have looked at it.
Worn or rusted grates
Chipped porcelain, thin rods and heavy rust make food stick and cook unevenly. We replace grates with ones that fit your model.
Briquette trays and heat shields
These parts take the drippings and the heat, so they burn through before anything else. Replacing them protects the burners underneath.
Ignition modules and wiring
Battery-fed and electronic ignitions fail from moisture, corrosion and old wire. We trace the fault, then replace the module or the lead that is actually bad.
Rotisserie motors and grill lights
A rotisserie that stalls or a light that has gone dark is usually a motor, a connection or a power supply problem. We check each before swapping anything.
Repair it right
We Diagnose Before You Buy Parts
The same symptom can come from different causes. A grill that will not heat might need a regulator, or it might only have a blocked tube. Ordering parts from a guess often means paying twice, so we check first.
When you book, send a photo of the label with the model and serial number. It is usually on the cart frame, inside a door or on the back of the grill. With that we can show up knowing what you have.
The truck carries parts for most brands, and a lot of repairs are finished on the first visit. For anything we do not have on board, parts for most built-in grills are available at store.progrill.com.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens
When one part fails in a built-in, the answer is almost always to repair it. The island, the countertop and the gas line represent most of the investment, and replacing a burner or a valve costs far less than tearing it all out.
We also design, fabricate and repair outdoor kitchens: islands, cabinets, countertops and the appliances set into them. If a project needs a new cutout or a rebuilt section, our team handles it.
The grill is not the only thing we work on. We service smokers, griddles, pizza ovens, fireplaces and fire pits too.
Inspections & maintenance
Inspections and Maintenance in Whittier
A grill inspection is a full check of the gas connections, burners and ignition system, ending in a written report. It tells you what is fine, what is wearing and what needs attention soon. It is useful before a big cookout, when you move into a house with an existing grill, or when you are deciding whether an older grill is worth fixing.
Most homes should have a deep cleaning every 6 to 12 months. If you grill several times a week, or cook fatty cuts that drip a lot, plan on the shorter end.
The Protection Plan is a membership for scheduled cleanings, so the work happens on a regular rhythm without you having to remember it. Ask us about it when you book.
Wear and tear
What Wears Grills Out in Whittier
Whittier is inland, so salt air is not the main enemy here. Heat and dust are. Grills sit in the sun, collect fine dirt, and go unused for weeks at a time. That is when covers get skipped and burners get neglected.
Spiders are the other regular culprit. They build nests in the venturi tubes, which block the gas and air flow and cause yellow flames or a burner that will not light. Cleaning those tubes is part of every service, and it is a cheap thing to prevent compared with a burner replacement.
When it's time to replace
New Grills: Measured, Installed, Old One Hauled Away
Sometimes repair does not make sense. The firebox may be rusted through, the parts may be discontinued, or the repair costs more than the grill is worth. When that happens we help you move on.
We measure the cutout or the space, sell you a new grill, install it and haul the old one away. For built-ins, an accurate measurement is the difference between a clean fit and a new round of masonry work, so we do not leave it to chance.

What to expect
What a Visit Looks Like
- You book online and tell us what the grill is doing. A photo of the model and serial number label helps.
- The technician arrives, looks at the grill and explains what needs to be done.
- We clean, repair or inspect on site, using parts from the truck when the job calls for them.
- You get a rundown of what we found. Inspections come with a written report.
- We clean up our work area before we leave.

