Mobile service
We come to you in Venice
Every cleaning and repair happens at your home. The technician sets up a work area next to the grill and does the job there. You don't load a greasy grill into a car, and you don't wait on a shop's backlog.
This matters most for built-ins. A grill set into a stone or stucco island isn't going anywhere, and burners, valves and igniters are easier to work on with the grill left in place. Freestanding carts get the same service on the patio, driveway, side yard or roof deck.
We cover all of Venice, including Venice Beach, the Venice Canals, Abbot Kinney, Oakwood, Milwood, Marina Peninsula, Penmar and Southeast Venice. If your street isn't named here, ask when you book.
Pro Grill started in Southern California in 2018 and has serviced over 25,000 grills. The team has 50+ years of combined grill experience, and we're insured. We have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep grill cleaning
A deep clean is a full teardown, not a quick brush of the grates. Here is what's included:
- Cooking grates scrubbed free of baked-on residue
- Burners removed, cleaned, and the ports cleared
- Heat plates or flavorizer bars cleaned, or flagged if they're worn through
- Briquette trays and briquettes checked and cleaned
- Firebox scraped out, including the corners under the burners
- Drip tray and grease management system emptied and cleaned
- Igniter electrodes cleaned and tested
- Hood interior and outside stainless cleaned and wiped down
- Our work area cleaned up before we leave
Buildup is more than a looks problem. Grease and carbon feed flare-ups, clogged burner ports give you uneven heat, and grease holds moisture against metal, which speeds up rust. Burners that sit in that mess rot out sooner. A cleaning won't bring back a burner that's already rusted through, but we'll tell you what we find so you can decide.

Start with the symptom
BBQ repair in Venice
Most repair calls come down to a short list of parts: burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators. Our trucks carry parts for most brands, so plenty of repairs are finished on the first visit. These are the problems we're called for most near the coast.
Won't light, or the igniter clicks and nothing happens
Salt-corroded igniter tips and electrodes are a common cause, along with a dead battery or a spider-clogged burner. We test the spark, clean or replace the electrode, and confirm the burner lights.
Burner rusted through
Salt air eats burners from the outside while grease and moisture work on them from the inside. You'll see holes, flaking metal or flames coming from the wrong places. We replace the burner and check the valve feeding it.
Knobs stuck or seized
Rust on the valve stem locks the knob in place, and forcing it can snap the stem. We free up the valve if it's salvageable and replace it if it isn't.
Hood hinges and handles corroded
Rusted hinges make the lid stiff or crooked, and corroded handles loosen or break. We replace the worn hardware so the hood opens and closes properly.
One burner is weak
Blocked ports, a partly closed valve or a bad burner can all cause this. We clear the ports first, then check the valve and replace whatever is failing.
Yellow or lazy flames
A healthy gas flame is mostly blue. Yellow, floppy flames point to a dirty burner, a blocked venturi tube or an air-mixture problem. We clean it out, adjust it, and watch it burn.
Stuck under 300 degrees
A regulator that has gone into low-flow mode is a frequent cause. Others are a tired hose or a fouled burner. We test the pressure, find the weak link and fix it.
Smells like gas
Shut the gas off at the tank or the valve and don't light the grill until it's been checked. Leaks usually come from a loose fitting, a cracked hose or a failing valve. We leak-test every connection and repair what's found.
Repair it right
We diagnose before you buy parts
The same symptom can have several causes. A grill that won't light might need a battery, an electrode, a cleaned burner or a new regulator. Guessing means paying for parts you didn't need, so we check first and replace only what's actually broken.
When you book, take a photo of the label with the model and serial number and send it along. It lets us line up the right parts before we show up. The truck carries parts for most brands, and more are available at store.progrill.com. If a part isn't on the truck, we order the correct one rather than forcing a close match.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens in Venice
When one part fails on a built-in, repair usually beats replacement. The island, the cutout and the gas line are the hard parts of the setup, and a bad burner or valve doesn't mean the grill is finished. We replace the part and the rest keeps working.
We also do outdoor kitchen design, fabrication and repair, from a single grill island to a full cooking area. Beyond grills, we service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas connections, burners and ignition. You get a written report listing what's working, what's wearing out and what needs attention. It's useful if you're about to host, buying a house with a grill, or just unsure about an older unit.
Most homes should have a deep clean every 6 to 12 months. If you grill several times a week, plan on the shorter end. The Protection Plan membership puts your cleanings on a schedule so you don't have to remember to book them.
Wear and tear
What salt air does to grills in Venice
Venice sits close to the ocean, and salt in the air settles on every grill outside. It rusts burners and grates faster than they'd wear inland, pits and stains stainless steel, and corrodes igniter tips and electrodes until the spark gets weak or quits.
You can slow it down. Keep the lid closed and use a cover, wipe stainless with a soft cloth, and burn off the grates after cooking. Have the burners and electrodes looked at once a year. The closer a grill is to the water, the sooner it shows.
When it's time to replace
New grills: measured, installed, old one hauled away
Sometimes repair doesn't make sense, such as a body rusted through or a cost that approaches a new unit. In that case we measure your cutout, sell you a grill that fits, install it, and haul the old one away. You won't be left with a dead grill sitting in the side yard.

What to expect
What a visit looks like
- You book online and tell us the grill type and what it's doing, with a photo of the model and serial label if you have one
- The technician arrives, looks the grill over and explains what's needed
- We clean, repair or both, working at your grill
- We test the burners and ignition before we call it done
- We clean up our work area and go over what we did

