Mobile service
We come to you in Culver City
A Pro Grill technician arrives at your house with the tools and parts to clean or repair your grill right where it sits. Nothing gets loaded onto a truck and driven to a shop, and you never have to haul a greasy grill anywhere.
This matters most for built-ins. A built-in is set into a masonry or steel island with a gas line behind it, so the work happens in place. Freestanding carts, portable grills and smokers are handled on the patio, driveway or side yard.
We cover Blair Hills, Culver Crest, Culver West, Fox Hills, Studio Village, Downtown Culver City, Lindberg Park, Sunkist Park and Carlson Park, plus the streets around them. We have been doing this since 2018, have serviced over 25,000 grills, and have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep grill cleaning
A deep cleaning is more than scraping the grates. We take the grill apart, clean each part, and put it back together working. Here is what is included:
- Cooking grates, scrubbed free of carbon
- Burners, with every port cleared
- Heat plates or flavorizer bars
- Briquette trays, and ceramic or lava rock where the grill uses them
- Firebox, scraped out from the bottom up
- Drip tray and grease management, including the cup and the path grease takes to reach it
- Igniter electrodes, cleaned and checked for a strong spark
- Hood and outside stainless, wiped down and polished
- Cleanup of our work area when we finish
Buildup is not only a looks problem. Old grease feeds flare-ups and can catch fire in the firebox. Clogged ports cause uneven heat, so one side scorches while the other stays cool. Moisture trapped under grease and ash starts rust, and burners sitting in that mess rot out sooner than they should. A clean grill lights more reliably and cooks more evenly.

Start with the symptom
BBQ repair at your Culver City home
Most repairs come down to a part that wore out or a passage that got blocked. We repair burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators. These are the calls we get most.
Spiders in the burner tubes
Spiders and insects nest in the venturi tubes where gas and air mix. That blocks the flow and causes yellow flames or fire at the knob end. We clear the tubes and clean the burner.
Clogged burner ports
Grease, ash and dust fill the small ports, so flames come out short, uneven or not at all. We clean each port by hand and replace the burner if it has corroded through.
Hot spots
One zone burns the food while another barely warms it. The cause is usually blocked ports, worn heat plates or a failing burner. We find which one and fix it.
Flare-ups
Flames leaping above the grates usually mean grease has built up on the heat plates and in the firebox. Sometimes the plates have burned through and no longer shield the burners. We remove the grease and replace plates that have given out.
Weak flame, even on high
If the grill lights but stays low, the regulator may be stuck in low-flow bypass mode. This often happens when the tank valve is opened too fast. We reset the regulator, or replace it if it will not hold.
Clicks but won't light
Clicking with no flame points to a dirty or worn electrode, a dead battery or module, or weak gas flow. No click at all points to the igniter itself. We test the spark first, then fix the real cause.
Smells like gas
Shut the gas off at the tank or valve and do not light the grill until it has been checked. Leaks are usually at a hose connection, a valve or a cracked hose. We find the leak and repair it before the grill is used again.
Repair it right
We diagnose before we buy parts
The same symptom can have different causes. A weak flame might be a blocked tube, a tired regulator or a clogged burner. Swapping parts by guesswork costs you money, so we check first and replace only what is actually failing.
If you can, take a photo of the model and serial number label on your grill and have it ready when you book. It lets us bring the right parts the first time. Our truck carries parts for most brands, and more are available at store.progrill.com.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens in Culver City
When one part fails on a built-in, repair almost always makes more sense than replacement. A new burner, valve or igniter costs far less than cutting out an island and starting over, and the grill around the part is often in good shape.
We also design, fabricate and repair outdoor kitchens, from a single island to a full cooking area. Beyond grills, we service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas supply, burners and ignition. You get a written report listing what we found and what needs attention, which is useful before a big cookout, after a grill has sat unused, or when you are deciding whether to repair or replace.
Most homes do well with a cleaning every 6 to 12 months. If you grill several times a week, plan on the shorter end. The Protection Plan membership puts cleanings on a schedule so you do not have to remember them.
Wear and tear
What wears grills out in Culver City
Heat and dust do most of the damage here. Fine dust and debris settle into burner ports, and long dry stretches mean a grill can sit unused with grease baking onto the parts.
Spiders are the other regular problem. They crawl into the venturi tubes and build nests that block the gas, and the first sign is often a flame that is yellow, weak or uneven. Covering the grill and cleaning it on a schedule keeps both problems in check.
When it's time to replace
New grills, measured and installed
Sometimes repair does not make sense, such as a cracked firebox or a grill whose parts cost more than the grill is worth. In that case we measure your cutout, sell you a new grill that fits, install it, and haul the old one away.

What to expect
What a visit looks like
- You book online or by phone and tell us the grill type and the problem
- The technician arrives in the scheduled window and looks at the grill with you
- We explain what we found and what it needs before starting
- We clean, repair or both, on site
- We test the grill, clean up our work area and go over what we did

