Mobile service
We Come to You in Inglewood
Your grill stays where it is. A Pro Grill technician pulls up to your home in Inglewood with the tools, cleaning supplies and common parts, and does the work in the driveway, on the patio or next to the outdoor kitchen. Nobody has to scrub a greasy grill in the garage or fit it into the back of a car.
That matters most for built-ins. A grill set into a masonry or stainless island is not coming out, and it should not have to. We work on it in place.
We cover homes in Morningside Park, Fairview Heights, Downtown Inglewood, Hollywood Park, Centinela Heights, Lockhaven and the streets around them. Our team has more than 50 years of combined grill experience, and we are insured.
Deep cleaning
Deep BBQ Grill Cleaning
A real deep clean means taking the grill apart, not wiping the grates and leaving. Here is what we go through:
- Cooking grates, cleaned of baked-on carbon and checked for rust and cracks
- Burners, with every port cleared so the flame is even
- Heat plates or flavorizer bars, scraped and inspected for burn-through
- Briquette trays and briquettes
- The firebox, scraped down to bare metal walls
- Drip tray and grease management, emptied and cleaned out
- Igniter electrodes, cleaned and tested for a strong spark
- Hood and outside stainless, cleaned and polished
- Our work area, cleaned up when we leave
Buildup is more than a looks problem. Old grease feeds flare-ups and can start a fire in the firebox. Clogged ports cause uneven heat, so one side scorches and the other will not sear. Grease and moisture trapped against metal speed up rust, and burners that sit in that mess rot out sooner than they should. A clean grill cooks better and its parts last longer. We do not promise a cleaning will make a worn grill like new, but it will run the way it was built to.

Start with the symptom
BBQ Repair at Your Inglewood Home
Most grill problems come down to a handful of parts: burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators. We repair all of them on site. These are the problems we see most often.
Won't light
If the igniter clicks but nothing catches, the cause is usually a dirty or worn electrode, a bad wire, or a dead module. We test the spark, replace what failed, and confirm the burner lights on the first try.
Flare-ups and grease fires
Flames jumping above the grates come from grease built up on the heat plates, in the firebox and in the drip tray. We clean it all out, replace any heat shields that no longer do their job, and show you where grease collects.
Low heat, or it won't get past 300 degrees
A regulator stuck in low-flow bypass mode is the common cause. It happens after a sudden gas surge or a tank opened too fast. We reset or replace the regulator and check the flame at every burner.
One burner is weaker than the rest
Dust, grease and debris in the burner ports block the gas. Sometimes a burner is simply worn out. We clear the ports, and when the burner is past saving, we replace it.
Yellow, lazy flames
A healthy flame is mostly blue. Yellow and weak usually means the venturi tubes are blocked, often by spiders and nests. We clear the tubes and set the air mix so the flame burns clean.
Knob spins but the gas doesn't come on
The stem has slipped or the valve behind the knob has failed. We replace the knob or the valve, whichever is the real problem, and check the valve for leaks while we are there.
Burned-through heat shields and briquette trays
These parts take the most heat, and eventually they give out. Grease then drips straight onto the burners. We fit matching replacements so the heat spreads evenly again.
Smells like gas
Shut off the gas at the tank or the supply line and do not light the grill until it has been checked. Leaks come from loose connections, cracked hoses, or a worn valve. We find the source, fix it and test the connection.
Repair it right
We Diagnose Before We Buy Parts
The same symptom can have several causes. A grill that will not stay lit might need a regulator, a clean burner, or a new valve. Replacing parts by guesswork wastes money, so we check first and replace only what is actually failing.
To speed things up, take a photo of the label with the model and serial number before we arrive. It is usually on the frame, inside a cabinet door, or on the back of the grill. With that, we know what we are working on and can bring the right parts.
The truck carries parts for most brands. If something is not on board, we can order it, and parts for most built-in grills are also available at store.progrill.com.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens
When one part fails in a built-in, repair almost always makes more sense than replacement. A new burner, valve or igniter costs far less than cutting out the grill and rebuilding the island around a new one. We fix the part and the grill goes back to work.
We also design, fabricate and repair outdoor kitchens: islands, counters, doors, drawers and the grill that sits in them. Smokers, griddles, pizza ovens, fireplaces and fire pits are part of the work too.

Inspections & maintenance
Inspections and Regular Maintenance
A grill inspection is a full check of the gas connections, burners and ignition system. You get a written report of what we found, what needs attention now, and what can wait. It is useful before a big cookout, after a grill has sat unused, or when you are buying a home with an outdoor kitchen.
Most homes should have a deep cleaning every 6 to 12 months. If you grill several times a week, do it more often. For people who would rather not keep track, the Protection Plan membership puts regular cleanings on a schedule so they happen without you having to call.
Wear and tear
What Wears Grills Out in Inglewood
Inglewood is inland, and the usual grill trouble here is heat, dust and spiders. Hot weather and long cooking sessions bake grease onto the heat plates and burners, and dust settles into burner ports and clogs them.
Spiders also like the venturi tubes, the small tubes that carry gas and air to the burners. A nest in there restricts the gas flow, which shows up as yellow flames, weak heat or a burner that will not light. A grill that sits unused for a few weeks is the most likely to have one.
When it's time to replace
New Grills: Measured, Installed, Old One Hauled Away
Sometimes repair does not make sense: the firebox has rusted through, or the cost of parts is close to the cost of a new grill. In that case we measure your cutout or patio space, sell you a new grill that fits, install it and haul the old one away.
You do not have to find a way to dispose of a heavy, greasy grill. We take it with us.

What to expect
What a Visit Looks Like
- We arrive in the window we gave you and look at the grill with you.
- We find the problem before touching any parts and tell you what we found.
- We do the cleaning, the repair, or both, on the spot.
- We test the grill: ignition, flame and heat at each burner.
- We clean up our work area before we leave.
More than 2,500+ five-star reviews (Google, Yelp and Facebook) come from visits that go just like this. Book online and we will find a time that works.

