Mobile service
We come to you in Lantana
Pro Grill is a mobile service. The technician pulls up with the tools, cleaning gear and parts, and the work happens next to your grill. A freestanding grill stays on your patio. A built-in stays in its island, which is where it has to stay anyway.
We cover Downtown Lantana, Lantana Shores, Lantana Cove, Lantana Lakes, Lantana Isles, Lantana Heights and the streets around them. We started in Southern California in 2018, work in Arizona and Florida now, and have serviced over 25,000 grills. We also have 2,500+ five-star reviews (Google, Yelp and Facebook). The team has 50+ years of combined grill experience, and we are insured.
Deep cleaning
Deep grill cleaning
A deep cleaning is more than a scrub and a rinse. We take the grill apart and work through every part that touches fire, food or grease. Here is what is included:
- Cooking grates, scraped, soaked and cleaned
- Burners, cleaned and checked for cracks and rust
- Heat plates or flavorizer bars
- Briquette trays and the firebox
- Drip tray and grease management system
- Igniter electrodes, cleaned so they spark where they should
- Hood and outside stainless
- Cleanup of our work area when we finish
Buildup is not just ugly. Old grease feeds flare-ups and can catch fire. Clogged burner ports give you uneven heat. Wet, greasy residue holds moisture against metal, so rust starts sooner and burners rot out from underneath. A cleaned grill lights better, heats more evenly and lasts longer. We do not promise it will look new, because worn parts are worn parts.

Start with the symptom
BBQ repair at your Lantana home
Most grill problems come down to a small list of parts: burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators. We repair all of them on site. These are the problems we see most.
Grates rusting or flaking
Moisture and salt eat through bare cast iron and thin plated steel. If the grates are sound we clean and re-season them. If they are flaking into your food, we replace them.
Burner rusted through
Burners rot from the inside, and you often see it as a ragged, uneven flame or a hole along the tube. A burner like that will not heal. We fit a new one that matches your model.
Igniter clicks, no flame
The usual causes are a corroded electrode tip, a loose wire dead battery or a dirty spark gap. We clean or replace the electrode and test the spark before we leave.
Knobs seized or spinning
A knob that will not turn is usually a rusted valve stem. A knob that spins freely without opening the gas is worn or stripped. We free up or replace the knob or valve, depending on what we find.
Won't get past 300 degrees
This is most often a regulator that has gone into low-flow bypass mode, or a gas line problem upstream of the burners. We check the regulator and pressure first, then the burners.
Won't stay lit
A flame that drops out can come from a weak regulator, a blocked burner port or a bad thermocouple or valve. We trace which one it is before replacing anything.
One burner is weak
Rust, grease or an insect nest in the burner tube blocks the gas flow to it. We clear the blockage or replace the burner if the metal is gone.
Smells like gas
Shut the gas off at the tank or the supply line and do not light the grill until it has been checked. We test the hoses, fittings and valves for leaks and repair what we find.
Repair it right
We diagnose before we sell you parts
The same symptom can have three different causes. A grill that will not light might need a new igniter, a cleaned gas line or a replaced regulator. We find the cause first, so you only pay for the part that fixes it.
It speeds things up if you take a photo of the model and serial number label before we arrive. It is usually on the frame, inside a cabinet door or on the back panel. The truck carries parts for most brands, and more are available at store.progrill.com if we need to order something for your built-in.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
If one part has failed on a built-in grill, repair almost always makes more sense than replacement. The island, countertop and gas line are already built around it. A new burner, igniter or valve costs far less than tearing out a cutout and starting over.
We also design, fabricate and repair outdoor kitchens, and we work on smokers, griddles, pizza ovens, fireplaces and fire pits. If it burns on your patio, ask us.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas supply, burners and ignition, and you get a written report on what is working, what is worn and what needs attention. It is useful before a big cookout, when you buy a house with a grill, or any time something feels off.
Most homes should have the grill cleaned every 6 to 12 months. Cook on it every week, or often with fatty food, and aim for the shorter end. If you would rather not keep track, the Protection Plan membership puts scheduled cleanings on the calendar for you.
Wear and tear
What wears grills out in Lantana
Lantana is close to the ocean, and salt air is hard on grills. It rusts burners and grates, pits and stains stainless steel, and corrodes igniter tips and the stems behind the knobs. Add Florida humidity and metal that stays damp overnight corrodes faster.
A cover helps, and so does wiping down stainless regularly. Regular cleanings catch rust early, while a part can still be saved. Most of the burners we replace here have rotted out from the inside, where you cannot see it until the flame goes uneven.
When it's time to replace
New grills, measured, installed and hauled away
Sometimes repair is not worth it. The firebox has rusted through, the frame is warped, or the repair bill would rival a new grill. In that case we measure the cutout, sell you a grill that fits, install it and haul the old one away.
For a built-in, the measurements matter more than anything else. A grill that is a half-inch too wide will not go in the island. We check before you order.

What to expect
What a visit looks like
- You book online and tell us what the grill is doing.
- The technician arrives at the scheduled time and looks the grill over.
- We explain what we found and what it needs before starting repairs.
- We clean, repair or both, using parts from the truck when we have them.
- We test the grill, light it and check the flame.
- We clean up our work area and leave.
Book a visit online and we will come to your Lantana home.

