Mobile service
We come to you in Briny Breezes
Every job starts at your house. Our technician arrives with the tools, a work area setup and the common parts, and does the cleaning or repair right where the grill sits. You don't haul a greasy grill anywhere, and you don't wait weeks for a shop to call you back.
We cover all of Briny Breezes. Built-in grills are the easiest to service this way, since they can't be moved, but freestanding gas grills, cart models and portable units get the same treatment. Pro Grill has been working on grills since 2018, has serviced over 25,000 of them, and has 2,500+ five-star reviews (Google, Yelp and Facebook). The team has 50+ years of combined grill experience, and we're insured.
Deep cleaning
Deep grill cleaning, start to finish
A deep cleaning is not a scrub of the grates. We take the grill apart, clean each piece and put it back together working. Here is what's included:
- Cooking grates, scraped and washed
- Burners, cleaned and the ports cleared
- Heat plates or flavorizer bars
- Briquette trays and briquettes
- Firebox, scraped out from the bottom up
- Drip tray and grease management, emptied and cleaned
- Igniter electrodes, cleaned and checked
- Hood and outside stainless, wiped down and polished
- Cleanup of our work area when we're done
Buildup is more than a looks problem. Old grease feeds flare-ups and can catch fire in the firebox. Clogged burner ports give you uneven heat, with one side of the grates scorching and the other barely warm. Wet carbon and grease hold moisture against metal, so rust starts sooner, and burners that sit in that mess rot out from the inside. Cleaning them on schedule costs far less than replacing them.

Start with the symptom
BBQ repair at your Briny Breezes home
We repair burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators. These are the problems we see most often on oceanfront grills.
Burners rusted through
Salt air eats burner tubes from the outside, leaving holes and flaking metal along the ports. We replace the burners and check the venturi tubes and valve connections at the same time.
Clicks but won't light
Corroded igniter tips and electrodes can't throw a spark, or the spark lands too far from the gas. We clean or replace the electrode, check the wire and the module, and test the ignition before we leave.
Knobs and valve stems seized
Salt and moisture lock up knobs and the stems behind them, and forcing them can snap a stem. We free the stem or replace the knob or valve, depending on what's left of it.
Grates flaking or rusting
Rust that comes off on your food means the coating or the metal is gone. We replace grates that are past saving and clean the ones that aren't.
Pitted or stained stainless
Surface staining often comes off. Deep pitting does not, and we'll tell you which one you have, so you don't pay to polish something that can't be fixed.
Smells like gas
Shut the gas off at the tank or the supply valve and do not light the grill until it has been checked. Common causes are a loose fitting, a cracked hose or a leaking valve. We find the leak, fix it and test the connections.
One burner is weaker than the rest
Usually a blocked port, a spider nest in the venturi tube or a tired valve. We clear it or replace the part that's failing.
Repair it right
We diagnose first, then replace parts
The same symptom can come from different causes. A grill that won't stay lit might need a new regulator, or it might just have a clogged tube. Guessing means buying parts you didn't need, so we check the grill before we replace anything and tell you what we found.
If you're booking a repair, take a photo of the label with the model and serial number and send it with your request. It lets us bring the right parts. The truck carries parts for most brands, and parts for most built-in grills are also available at store.progrill.com.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When one part fails on a built-in, repair is usually the better move. The grill is set into masonry or a stainless frame, and replacing the whole unit means measuring, cutting and sometimes rebuilding the island. A new burner, igniter or valve is quicker and much less disruptive.
We also design, fabricate and repair outdoor kitchens. That includes the cabinets, countertops, access doors, side burners and the grill cutout. Beyond grills, we work on smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas connections, burners and ignition. You get a written report listing what's fine, what's wearing and what needs attention, so you can decide what to fix and when. It's useful before a busy grilling season or before buying a house with a built-in.
Most homes should have a deep cleaning every 6 to 12 months. Go closer to six if you grill several times a week or cook fatty foods. The Protection Plan is a membership for scheduled cleanings, so the work happens on a calendar instead of after something goes wrong.
Wear and tear
What wears grills out in Briny Breezes
The town sits on the Atlantic, and salt air is hard on grills. It rusts burners, grates and stainless steel, and it corrodes igniter tips until they stop sparking. Seized knobs and stuck valve stems follow.
Florida humidity makes it worse, because grease and moisture sit together inside a closed grill. A cover helps, and so does wiping the exterior down regularly. A grill that gets cleaned on schedule lasts a lot longer than one that doesn't.
When it's time to replace
New grills, measured, installed and hauled away
Sometimes repair doesn't make sense, such as when the firebox has rusted through or repairs would cost close to a new grill. In that case we measure the cutout or the space, help you choose a replacement, sell it and install it. We take the old grill away with us.

What to expect
What a visit looks like
- You book online or by phone and tell us what the grill is doing.
- The technician arrives in the scheduled window and looks over the grill.
- We explain what we found and what it needs before starting repair work.
- We clean, repair or both, then test the burners and ignition.
- We clean up our work area and go over what we did.

