Mobile service
We come to your Delray Beach home
A Pro Grill technician arrives with tools, parts and cleaning gear, and the grill stays where it is. Nothing goes in a trunk, and nobody has to wrestle a greasy firebox into the back of an SUV.
That matters most for built-in grills, which are set into an island and are not going anywhere. Freestanding gas grills, cart models and charcoal grills get the same service at the house.
We work across Delray Beach, including Old Delray, the Marina Historic District, Del-Ida Park, Lake Ida, Osceola Park, Palm Trail, Seagate, Tropic Isle, Addison Reserve and Delray Dunes, and the streets around them. If your street isn't on that list, ask when you book.
Deep cleaning
Deep grill cleaning
A deep cleaning is not a quick scrape and a wipe-down. We take the grill apart, clean each piece and put it back together. A full cleaning covers:
- Cooking grates, scrubbed and cleaned on both sides
- Burners, including the ports where flame comes out
- Heat plates or flavorizer bars
- Briquette trays and the briquettes in them
- The firebox, scraped out down to bare metal
- Drip tray and grease management, emptied and cleaned
- Igniter electrodes, cleaned so they spark where they should
- The hood and outside stainless, wiped and polished
- Cleanup of our work area when we're done
Buildup is more than a looks problem. Old grease feeds flare-ups and can catch fire in the firebox. Caked-on residue blocks burner ports, so heat comes out uneven and one side of the grill runs hotter than the other. Grease and moisture trapped against metal speed up rust, and burners that sit in that mess rot out sooner than they should. A cleaning will not undo damage that's already done, but it slows the next round of it.

Start with the symptom
BBQ grill repair in Delray Beach
Most repairs are done on the first visit, at your grill, with parts from the truck. These are the problems we see most often here and what we usually do about them.
Burners rusted through
Salt air and moisture eat burner tubes from the outside in, leaving holes and flaking metal. We replace the burners and check the valves and orifices behind them.
Igniter clicks but nothing lights
Electrode tips corrode and stop throwing a spark, or the wire and module have failed. We test the spark, then clean or replace the electrode, wire or module.
Grates flaking or rusting
Plated and bare steel grates break down fast near the coast. Rust that's only on the surface comes off. Grates that are pitting or shedding pieces get replaced.
Hood hinges and handles corroding
Hinges seize, handles loosen and the lid stops sitting square. We free up or swap the hardware so the hood opens and closes the way it should.
Knobs and valve stems seized
Rust locks a stem in place, or the knob spins without turning the gas. We replace the knob or the valve, depending on which one gave out.
One burner is weak
The usual causes are clogged ports, a blocked venturi tube or a failing valve. We clear what's blocked and replace what's worn.
Won't get past 300 degrees
This is often a regulator problem, sometimes a dirty burner or a heat plate that has burned through. We check gas pressure first, then the burners.
Smells like gas
Shut off the gas at the tank or the line and do not light the grill until it has been checked. We test the hose, fittings, regulator and valves for leaks and fix the source.
Repair it right
We diagnose before we sell you parts
The same symptom can come from different faults. A grill that runs cool might need a regulator, or it might just have spider webs in the burner tubes. Guessing means paying for parts you didn't need, so we check first and tell you what we found.
When you book, send a photo of the model and serial number label if you can find it. It's usually on the frame, inside the cabinet door or on the back of the cart. It lets us bring the right parts the first time.
The truck carries parts for most brands. If something has to be ordered, more parts for most built-in grills are at store.progrill.com.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens in Delray Beach
When one part fails on a built-in, repair is usually the better move. The island, the countertop and the gas line are the expensive parts, and they're already there. A new burner, valve or igniter gets the grill working again without tearing out the cabinetry around it.
We also design, fabricate and repair outdoor kitchens: islands, cutouts, doors, drawers and the grill that goes in them. If your outdoor kitchen needs work beyond the grill, we can look at the whole setup.
Grills aren't the only thing we service. Smokers, griddles, pizza ovens, fireplaces and fire pits are all part of the job.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas supply, burners and ignition, finished with a written report. It's useful before a big cookout season, when you're buying a house with a built-in, or any time a grill has been sitting.
Most homes do well with a cleaning every 6 to 12 months. Cook on it several times a week and it needs it more often.
If you'd rather not keep track, the Protection Plan membership puts scheduled cleanings on the calendar for you.
Wear and tear
What wears grills out in Delray Beach
Delray Beach sits close to the ocean, and salt air and humidity are hard on grills. Burners rust through, grates flake, stainless pits and stains, and igniter tips corrode until the spark stops.
Covering the grill helps, but a cover can also trap moisture against the metal. Regular cleaning, plus catching a rusty part before it fails, keeps small repairs from turning into big ones.
When it's time to replace
New grills, measured, installed and hauled away
Sometimes repair doesn't make sense. The firebox is rusted through, or parts are no longer made. In that case we sell you a new grill and take care of the rest.
We measure the cutout, so the new grill fits the opening you already have. We install it and connect it, then haul the old grill away.

What to expect
What a visit looks like
- You book online and tell us what the grill is doing, and send the model and serial number photo if you have one.
- The technician arrives in the window we gave you and checks the grill before touching anything.
- We tell you what we found and what it takes to fix it, and you approve it before work starts.
- We clean, repair or both on the same visit when parts are on the truck.
- We clean up our work area and show you what we did.
We're an insured company with 50+ years of combined grill experience, and we've serviced over 25,000 grills. We also have 2,500+ five-star reviews (Google, Yelp and Facebook).

