Mobile service
We Come to You in Highland Beach
Our technicians drive to your house and work on the grill where it stands. Nothing gets loaded onto a truck, and you don't have to find a shop that will take a greasy grill.
This matters most for built-ins. A grill set into a masonry or stainless island can't be moved, and most of the work happens in place anyway: cleaning the firebox, swapping a burner, replacing a valve. Freestanding grills and carts get the same service on the patio or by the pool.
We cover Bel Lido, Place Au Soleil, Villa Magna, Regency Highland Beach, and homes along Ocean Boulevard and Intracoastal Drive. Pro Grill started in Southern California in 2018, has serviced over 25,000 grills, and has 2,500+ five-star reviews (Google, Yelp and Facebook). Our team has 50+ years of combined grill experience, and we are insured.
Deep cleaning
Deep Grill Cleaning, Start to Finish
A deep cleaning is a full teardown, not a wipe-down. Here is what we do:
- Pull and scrub the cooking grates
- Clean and clear every burner, including the ports
- Clean or replace-check heat plates or flavorizer bars
- Empty and clean briquette trays
- Scrape and clean the firebox
- Clean the drip tray and the whole grease management path
- Clean the igniter electrodes so they spark where they should
- Clean the hood and polish the outside stainless
- Clean up our work area when we're done
Buildup is more than a looks problem. Old grease feeds flare-ups and grease fires. Clogged burner ports give you uneven heat, with one side scorching and the other barely cooking. Wet residue holds moisture against metal, which speeds up rust, and burners sitting in it rot out sooner than they should.

Start with the symptom
BBQ Repair at Your Door
Most grill problems come down to a worn or corroded part, and most of those parts we can replace during the visit. These are the repairs we see most often in Highland Beach.
Burners rusted through
Salt air and moisture eat burner tubes from the outside in, leaving holes and flaking metal. We replace the burner and check the valve and the area around it for more damage.
Igniter clicks but won't light
Usually the electrode tip is corroded, covered in residue, or the wire has failed. We clean or replace the electrode and test the spark before we leave.
Grates rusting or flaking
Rust that flakes onto food means the grates are past cleaning. We replace them with grates that fit your model, and cast or stainless options are usually available.
Knobs seized or spinning
A knob that won't turn is often a rusted valve stem. A knob that spins freely without the gas coming on has a stripped stem or a broken valve. We replace the knob, the valve, or both.
One burner is weak
This is commonly a blocked port, a spider nest in the venturi tube, or a failing valve. We check each one and fix the one that is actually causing it.
Won't get past 300 degrees
Low heat points to a regulator stuck in low-flow mode, a dirty burner, or a gas supply problem. We test the pressure and flame, then repair or replace what's at fault.
Smells like gas
Shut the gas off at the tank or line and don't light the grill until it's been checked. We look for leaks at the hose, regulator, valves and fittings, and repair them.
Briquette trays and heat shields burned through
These parts take the heat and drippings every cook, so they wear out. When they go, flames and grease reach places they shouldn't. We replace them and look over what sits beneath.
Repair it right
We Diagnose Before You Buy Parts
The same symptom can come from different causes. A weak flame might be a clogged burner, a bad regulator or a blocked venturi tube. Guessing and ordering parts online is how people end up paying for the wrong one twice.
So we check first. When you book, snap a photo of the model and serial number label on the grill or inside the cabinet and send it along. That lets us line up the right parts before we arrive.
Our trucks carry parts for most brands, so many repairs are finished the same visit. If a part has to be ordered, we can find it at store.progrill.com, which stocks parts for most built-in grills.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens in Highland Beach
When one part fails on a built-in, repair is usually the better move. The grill is already framed into the island, the gas line is run, and the countertop is cut to fit. Replacing a burner or valve costs far less than tearing out the cutout and starting over.
We also design, fabricate and repair outdoor kitchens: islands, counters, cabinet doors, access panels and the layout around the grill. And we service more than grills. Smokers, griddles, pizza ovens, fireplaces and fire pits all get the same on-site attention.

Inspections & maintenance
Inspections and Regular Maintenance
A grill inspection is a full check of the gas connections, burners and ignition system. You get a written report listing what we found, what's worn and what needs attention, so you know the condition of the grill before the next cookout, or before you buy or sell a home.
Most homes should have the grill deep cleaned every 6 to 12 months. If you grill several times a week, lean toward the short end of that range.
If you'd rather not keep track, the Protection Plan membership puts regular cleanings on a schedule so they get done without you having to call.
Wear and tear
What Wears Grills Out in Highland Beach
Highland Beach sits on the barrier island, between the ocean and the Intracoastal. Salt air and humidity are hard on grills here. They rust burners from the outside in, flake grates, pit and stain stainless, and corrode igniter tips and electrodes.
A grill that sits uncovered or goes unused for a few weeks can show it. Regular cleaning and early parts replacement are what keep rust from spreading to the valves and the firebox.
When it's time to replace
New Grills: Measured, Installed, Old One Hauled Away
Sometimes a grill is past repair: the firebox has rusted through, parts are no longer made, or the repair bill would come close to the price of new. When that's the case, we sell new grills, and we measure the cutout first so the new one fits.
We install it, connect the gas, test it, and haul the old grill away.

What to expect
What a Visit Looks Like
- You book online and send a photo of the model and serial number label.
- A technician arrives at the scheduled time and looks over the grill.
- We explain what we found and what we recommend before starting work.
- We clean, repair or both, using parts from the truck when we have them.
- We test the burners and ignition, then clean up our work area.
- You get a summary of what was done and what to watch for.

