Mobile service
We come to you in Burbank
Your grill gets cleaned or repaired in your backyard. Nobody loads a greasy firebox into a truck bed, and nothing sits at a shop for a week. A built-in set into an island can't be moved anyway, so we set up at the island and work there.
We service Magnolia Park, Downtown Burbank, the Media District, the Rancho Equestrian District, Toluca Lake, Northwest Burbank and the streets in between. Pro Grill started in Southern California in 2018 and has serviced over 25,000 grills. Our team has 50+ years of combined grill experience, and we're insured.
Deep cleaning
Deep grill cleaning
A deep clean goes well beyond a quick scrape of the grates. We take the grill apart, clean each piece and put it back together. Here is what's included:
- Cooking grates, scrubbed and rinsed
- Burners, cleaned and checked for blocked ports
- Heat plates or flavorizer bars
- Briquette trays
- Firebox, scraped out and cleaned
- Drip tray and grease management system
- Igniter electrodes
- Hood interior and outside stainless
- Cleanup of our work area when we're done
Buildup is more than an eyesore. Old grease feeds flare-ups. Caked-on residue over burner ports gives you uneven heat. Moisture trapped under grime starts rust, and burners that sit in that mess eventually rot out. Cleaning is cheaper than replacing parts.

Start with the symptom
BBQ repair in Burbank
Most grill problems come down to a handful of parts: burners, valves, igniters, regulators, grates and heat shields. Here are the problems we see most, and what we usually do about them.
Spiders in the venturi tubes
Spiders and their nests block the tubes that feed gas to the burners, which sends flame out the wrong end or starves it. We clear the tubes, clean the burners and check for damage.
Flare-ups and grease fires
Grease built up on the heat plates, in the firebox and in the drip tray is the usual cause. We strip it out, replace worn heat plates and set up the grease path so it drains properly.
Low flame, even with the knob on high
A regulator stuck in low-flow (bypass) mode is a common cause, often after the tank valve was opened too fast. We test the regulator and reset or replace it.
Hot spots and uneven heat
Clogged burner ports, warped heat plates or a burner that has started to fail all leave one side hotter than the other. We find which it is and fix that part.
Igniter clicks but won't light
The spark is weak, the electrode is dirty or out of position, or the gas isn't reaching the burner. We test each one in order and replace what failed.
Smells like gas
Shut the gas off at the tank or the line and don't light the grill until it has been checked. We test hoses, fittings, valves and the regulator for leaks and replace whatever is leaking.
Knob spins without turning on the gas
The knob has slipped on the valve stem, or the stem itself is worn. We replace the knob or the valve, depending on which has failed.
Briquette trays and heat shields burned through
Years of heat and grease eat through thin metal, and then burners and the firebox take the hit. We replace the trays and shields and clean up the damage underneath.
Repair it right
We diagnose before we buy parts
The same symptom can have different causes. A weak flame might be a regulator, a clogged burner or a bad valve. Swapping parts by guesswork costs you money, so we check first and replace only what's actually failing.
If you're booking a repair, take a photo of the label with the model and serial number. It lets us match parts before we arrive. Our truck carries parts for most brands, and more are available at store.progrill.com, including parts for most built-in grills.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When one part fails on a built-in, repair usually makes more sense than replacement. The grill is fitted into a cutout, tied into gas and often surrounded by stone or tile. Swapping a burner, valve or igniter costs far less than tearing out the island.
We also design, fabricate and repair outdoor kitchens. That covers new islands, countertops and cabinetry changes, and fixing what's already in your yard.
Smokers, griddles, pizza ovens, fireplaces and fire pits get the same service. If it burns fuel in your backyard, we can usually clean or fix it.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas supply, burners and ignition, finished with a written report. It's a good idea before a big cookout, after a grill has sat unused for months, or when you're buying a house with a built-in.
Most homes should have a deep clean every 6 to 12 months. If you grill several times a week, lean toward the shorter end. The Protection Plan membership puts those cleanings on a schedule, so you don't have to remember to call.
Wear and tear
What wears grills out in Burbank
Burbank is inland, so the trouble is rarely salt rust. Heat and dust are the usual culprits. Grease bakes onto parts, dust settles into burner ports, and burners and heat plates wear thin from long hot use.
Spiders are the other regular. They like the venturi tubes, and a grill that has been covered or left alone for a few weeks can be partly blocked by the time you go to light it.
Start with the symptom
New grills when repair doesn't make sense
Sometimes the firebox has rusted through or repair would cost more than the grill is worth. We'll say so plainly. If you want a replacement, we measure the cutout or the space, sell you a new grill, install it and haul the old one away.

What to expect
What a visit looks like
- You book a time, and a technician arrives at your home.
- We look over the grill and confirm what you've asked for, whether that's a cleaning, a repair or an inspection.
- We do the work at your grill, using the tools and parts on the truck.
- We test the grill, show you what we did and clean up our work area.
More than 2,500+ five-star reviews (Google, Yelp and Facebook) come from this same routine. To book, use the buttons on this page.

