Mobile service
We come to your Moorpark home
Pro Grill is a mobile service. A technician pulls up at your house, works on the grill right where it sits, and leaves the patio clean. Nothing gets loaded into a truck and driven to a shop, and you don't have to haul a greasy grill anywhere.
This matters most for built-ins. A grill set into a stone island isn't going to a shop, so we clean it, repair it and test it in place. Freestanding carts and portable grills get the same treatment.
We work throughout Moorpark, including Mountain Meadows, Peach Hill, Campus Park, Downtown Moorpark, Tierra Rejada Valley, Carlsberg and Villa Campesina. If your street isn't on that list, ask when you book and we'll tell you straight. We've been at this since 2018, have serviced over 25,000 grills, and have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep grill cleaning
A deep cleaning is more than a scrape and a wipe. We take the grill apart, clean what's underneath, and put it back together working properly. Here is what's included:
- Cooking grates, scrubbed and cleared of carbon
- Burners, cleaned and the ports cleared
- Heat plates or flavorizer bars
- Briquette trays
- Firebox, scraped out from the bottom up
- Drip tray and grease management system
- Igniter electrodes, cleaned so they spark where they should
- Hood and outside stainless
- Cleanup of our work area when we're done
Buildup is not just a looks problem. Old grease feeds flare-ups and can catch fire in the firebox. Carbon over burner ports gives you uneven heat, with one side searing and the other barely warm. Wet ash and grease hold moisture against metal, which speeds up rust. Burners that sit in that mess for years rot out from the outside in.
A cleaning gets a grill in far better shape and makes problems easier to spot. It doesn't repair worn-out parts, and we'll tell you if something needs replacing.

Start with the symptom
BBQ repair in Moorpark
Most grill problems come down to a handful of parts: burners, valves, igniters, regulators and the pieces that sit over the flame. These are the ones we see most often at homes in Moorpark.
Weak flame or low heat
Usually a partly blocked burner, a clogged orifice, or a regulator that isn't delivering full pressure. We clean and test the burners, then check the regulator and the gas supply.
Spiders in the burner tubes
Spiders and nests build inside the venturi tubes, which are the short tubes that feed gas and air to each burner. The blockage can send flame back toward the knobs and makes the grill burn unevenly. We clear the tubes and check for damage.
Stuck in low-flow mode
If the flame is tiny no matter how far you turn the knob, the regulator has likely tripped into bypass mode. We reset it if it will hold, and replace it if it won't.
Flare-ups and grease fires
Grease built up on heat plates, in the firebox and in the drip tray is the cause nearly every time. We clean it out, check that grease drains the way it should, and replace any heat plates that are too far gone.
One burner is weaker than the rest
This is often a clogged port or a corroded section of the burner. If cleaning doesn't bring it back, we replace that burner.
Igniter clicks but won't light
The cause is usually a dirty or misaligned electrode, a weak battery, or a failed igniter module. We test each in turn and replace what's bad.
Smells like gas
Shut the gas off at the tank or the line and don't light the grill until it's been checked. We test hoses, fittings, valves and connections for leaks and fix the source before the grill is used again.
Burned-through briquette trays and heat shields
These parts take the most heat and drippings, so they thin out and crack over the years. We replace them with parts that fit your grill, which usually brings back even heat and cuts down on flare-ups.
Repair it right
We diagnose before you buy parts
The same symptom can come from different causes. A grill that won't stay lit might need a new regulator, or it might just have spiders in the tubes. Buying parts first is how people end up with a box of the wrong ones. We check the grill, find the cause, and then fix it.
To speed things up, take a photo of the label with the model and serial number and send it when you book. It tells us what you have before we arrive.
Our truck carries parts for most brands, so many repairs are finished in one visit. If a part has to be ordered, you can find parts for most built-in grills at store.progrill.com.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When one part fails on a built-in, repair almost always beats replacement. The grill is sized to the cutout, tied into the gas line and surrounded by stone or tile. Swapping a burner, valve or igniter costs far less trouble than tearing out the island.
We also design, fabricate and repair outdoor kitchens. That covers new islands, cabinets and counters, as well as fixing doors, drawers and gas lines on one you already have.
Beyond grills, we service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
An inspection is a full check of the gas supply, burners and ignition, finished with a written report. It's useful before the season starts, when you buy a house with a grill, or when something feels off and you can't say what.
Most homes should have the grill cleaned every 6 to 12 months. If you grill several times a week, lean toward the short end of that range.
If you'd rather not keep track, the Protection Plan membership puts scheduled cleanings on the calendar so they happen without a phone call each time.
Wear and tear
What wears grills out in Moorpark
Moorpark is inland, so the usual trouble is heat, dust and spiders, not salt air. Long hot stretches are hard on igniters, regulators and rubber parts, and dust settles into burner ports and drip trays.
Spiders are the repeat offender. They get into the venturi tubes, block the gas flow and cause weak or uneven flames. A grill that sits unused for a few weeks can have a blockage by the time you light it again. Keeping the tubes clear and the burners clean prevents most of it.
When it's time to replace
When a new grill makes more sense
Sometimes repair isn't worth it. The firebox may be rusted through, the frame warped, or the repair bill may be close to the cost of a replacement. We'll say so plainly.
If you go with a new grill, we measure the cutout or the space, sell you a grill that fits, install it, and haul the old one away. You don't have to figure out the measurements or find a way to get rid of the old grill.

What to expect
What a visit looks like
- You book online and tell us the grill type and what's wrong, and send the model and serial number photo if you have it.
- A technician arrives in the window we gave you.
- We look the grill over and tell you what we find before starting work.
- We clean, repair or both, using parts from the truck when we have them.
- We test the grill by lighting it and checking every burner.
- We clean up our work area and go over what we did.

