Mobile service
We Come to Your Sherman Oaks Home
Everything we do happens in your backyard, on your patio or beside your outdoor kitchen. You don't load a greasy grill into a car, drop it at a shop and wait. A technician arrives with the tools, the cleaning supplies and a truck stocked with parts, and the work is done where the grill lives.
This matters most for built-ins. A grill set into a stone or stucco island isn't going anywhere, so the repair has to come to it. Freestanding carts and portable grills get the same treatment, just with fewer bolts to worry about.
We service homes across Sherman Oaks, including Sherman Oaks Estates, Valley Vista, Longridge Estates, Chandler Estates, Dixie Canyon and Deervale-Stone Canyon. If your street sits between those, we come there too. Pro Grill has been at this since 2018, has serviced more than 25,000 grills, and has 2,500+ five-star reviews (Google, Yelp and Facebook). The team has 50+ years of combined grill experience, and we're insured.
Deep cleaning
Deep BBQ Grill Cleaning
A deep cleaning is not a quick brush-down before a party. We take the grill apart, clean each piece and put it back together working properly. Here is what's included:
- Cooking grates, scrubbed and cleaned of baked-on residue
- Burners, with every port cleared so the flame is even
- Heat plates, flavorizer bars or heat tents, whichever your grill uses
- Briquette trays and any briquettes or ceramic radiants
- The firebox, scraped and cleaned out from the bottom up
- Drip tray and grease management system, emptied and cleaned
- Igniter electrodes, cleaned and checked for a clean spark
- Hood and outside stainless, wiped down and polished
- Our work area, cleaned up when we finish
Buildup is more than a cosmetic problem. Grease and carbon in the firebox feed flare-ups, and flare-ups scorch food and can turn into a grease fire. Clogged burner ports give you uneven heat, with one side searing and the other barely warm. Wet residue holds moisture against metal, which speeds up rust. Burners that sit in grease and ash rot out from the outside in, and replacing them costs far more than keeping them clean. A cleaning does not make an old grill new, but it does put it back in honest working shape.

Start with the symptom
BBQ Grill Repair in Sherman Oaks
Most repair calls come down to a handful of problems. Here are the ones we see most often and what we usually do about them.
Igniter clicks but the grill won't light
Usually a dead battery, a dirty or cracked electrode, or a loose wire. We test the spark, clean or replace the electrode and replace the igniter module if it has failed.
Smells like gas
Shut the gas off at the tank or the line and don't light the grill until it has been checked. Leaks come from worn hoses, loose fittings or a failing valve, and we find the source and fix it before anything gets lit.
Flame is weak or low
A regulator stuck in low-flow (bypass) mode is a common cause. It happens after the gas is opened too fast, and we reset it or replace it if it's worn out. A clogged hose or orifice can do the same thing.
Hot spots and uneven heat
Dust, grease and debris in the burner ports block the flame in places. We clean the ports, check the burner for damage and replace heat plates that have warped or burned through.
Spiders in the venturi tubes
Spiders and nests in the tubes block the gas, so you get yellow, lazy flames or flames that burn at the back of the burner. We clear the tubes and check the burner for damage from any flashback.
Flare-ups and grease fires
Built-up grease in the firebox and drip tray is almost always the cause. We clean it out, check the grease path to the tray and replace any heat shields that are no longer shedding drippings.
Knob spins but doesn't turn on the gas
The knob has slipped off the valve stem or the stem itself is worn. We replace the knob or the valve, depending on what we find.
Repair it right
We Diagnose Before You Buy Parts
The same symptom can come from different problems. A grill that won't stay lit might need a new regulator, a clean burner or a different thermocouple. Guessing means paying for parts you didn't need, so we check first: gas flow, spark, burners, valves and connections. Then we tell you what's wrong and what it takes to fix it.
If you're booking a repair, take a photo of the model and serial number label on your grill, usually inside a cabinet door, on the frame or under the hood. It lets us bring the right parts the first time. Our truck carries parts for most brands, and for built-ins we can order more through store.progrill.com.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens
When one part fails on a built-in, repair is usually the better move. The island, the countertop and the gas line are already built around that grill, and swapping a burner, valve or igniter costs a fraction of tearing out and starting over. We'll tell you plainly if a grill is past saving, but that is the exception.
We also design, fabricate and repair outdoor kitchens, including cabinets, countertops, access doors and the gas and electrical hookups that go with them. Beyond grills, we work on smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and Regular Maintenance
A grill inspection is a full check of the gas connections, burners and ignition, finished with a written report. It's useful before a big cookout season, after a grill has sat unused, or when you're buying a house with a grill in the yard.
Most homes do well with a cleaning every 6 to 12 months. If you grill several times a week, plan on the shorter end. The Protection Plan membership puts those cleanings on a schedule so you don't have to remember to book them.
Wear and tear
What Wears Grills Out in Sherman Oaks
Sherman Oaks is inland, in the San Fernando Valley, so salt air isn't the issue. Long stretches of summer heat are. Grills that sit in the sun bake grease onto the firebox, dry out hoses and gaskets, and wear down knobs and igniter parts.
Dust blows into burner ports, and spiders like to move into the venturi tubes. Both cut the gas flow and show up as weak flames, hot spots or a burner that won't light. A covered grill and a regular cleaning keep most of this from turning into a repair.
When it's time to replace
New Grills, Installed and the Old One Hauled Away
Sometimes repair stops making sense: the firebox has rusted through, the frame has failed, or parts for the model are gone. In that case we measure the cutout, help you pick a grill that fits, sell it, install it and haul the old one away. You don't have to deal with the disposal.

What to expect
What a Visit Looks Like
- You book online and tell us what the grill is doing and what kind it is.
- A technician arrives in the window we give you and looks at the grill with you.
- We explain what we found before starting any repair work.
- We clean, repair or both, using parts from the truck when we have them.
- We test the grill, clean up our work area and go over what we did.

