Mobile service
We come to your San Fernando home
Pro Grill is a mobile service. A technician pulls up to your house with the brushes, tools and parts to work on the grill right where it sits. Nothing gets loaded onto a trailer and driven to a shop.
We cover the city and the neighborhoods around it, including Downtown San Fernando, Mission Hills, Sylmar, Pacoima, Lake View Terrace, Granada Hills and Arleta.
This matters most for built-ins. A grill set into a block or stucco island is not going anywhere, so we clean and repair it in place. Freestanding carts and portable grills get the same work on the driveway, patio or side yard. We started in Southern California in 2018, have serviced over 25,000 grills, and have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep grill cleaning, grates to drip tray
A deep clean is not a quick scrape of the grates. We take the grill apart as far as it needs to go and work through every part that holds grease or ash. Here is what is included:
- Cooking grates scrubbed and cleared of baked-on residue
- Burners cleaned, with ports cleared so the flame is even
- Heat plates or flavorizer bars cleaned or flagged if they are worn
- Briquette trays and ceramic or lava rock checked and cleaned
- Firebox scraped out, including the corners and the bottom
- Drip tray and grease management system emptied and cleaned
- Igniter electrodes cleaned so the spark reaches the burner
- Hood interior, and the outside stainless wiped down and polished
- Our work area cleaned up before we leave
Buildup is more than a cosmetic problem. Old grease feeds flare-ups and can catch fire in the firebox. Clogged burner ports give you uneven heat, with one side searing and the other barely warm. Moisture trapped under carbon speeds up rust, and burners that sit in grease and ash rot out from the outside in. A clean grill lasts longer and cooks more evenly, but cleaning does not bring back parts that are already worn through, and we will tell you which ones those are.

Start with the symptom
BBQ repair in San Fernando
Most grill trouble comes down to a handful of parts: burners, valves, igniters, regulators, grates, heat plates and briquette trays. We repair all of them, plus knobs and the smaller pieces that hold them together. These are the problems we see most.
Spiders in the venturi tubes
Spiders build nests in the tubes that feed gas to the burners, which blocks the flow and can make flames back up toward the knobs. We clear the tubes, clean the burners and check the flame afterward.
Flare-ups and grease fires
Flames leaping above the grates usually mean grease has built up on the heat plates, in the firebox or in the drip tray. We strip it out, replace worn heat shields and show you where grease is collecting.
Flame is low on every burner
When all the burners are weak, the regulator is often stuck in low-flow (bypass) mode after the gas was shut off too fast or the tank was opened quickly. We reset it, or replace it if it will not hold.
Igniter clicks but nothing lights
A dead battery, a dirty or misaligned electrode, or a cracked wire is the usual cause. We test the spark, clean or replace the electrode and confirm the burner catches.
One burner is weaker than the rest
Clogged ports, a partial blockage in the tube or a burner that has started to corrode will cause this. We clean what can be cleaned and replace the burner when the metal is gone.
Smells like gas
Shut the gas off at the tank or the valve and do not light the grill until it has been checked. We test connections, hoses and valves for leaks and replace whatever is failing.
Briquette trays and heat shields burned through
These parts take the heat directly, and after years of grease and high temperatures they crack and break apart. We replace them with the right fit for your model so the heat spreads evenly again.
Rotisserie motor won't turn
The cause is usually a failed motor, a bad connection or a spit rod that binds. We test the motor, replace it if needed and check that the rod spins freely under load.
Repair it right
We diagnose first, then buy the parts
The same symptom can come from different problems. A weak flame might be a regulator, a blocked tube or a dirty burner. Swapping parts on a guess costs you money and fixes nothing. We check the grill first and replace only what is actually failing.
You can speed things up by taking a photo of the model and serial number label before we arrive. It is usually on the frame, inside the cart door or near the gas connection. With it, we can match parts to your exact grill.
Our trucks carry parts for most brands, so many repairs are finished on the same visit. If something needs to be ordered, store.progrill.com carries parts for most built-in grills.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When one part fails on a built-in, repair almost always makes more sense than replacement. The grill is already framed into the island, with the countertop, gas line and cutout in place. A new burner, valve or igniter costs far less than tearing out the cabinetry around it.
We also design, fabricate and repair outdoor kitchens. That includes islands, countertops, doors, drawers, side burners and the grill setup itself. If your kitchen needs more than a grill repair, we can look at the whole space.
Beyond grills, we service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas supply, burners and ignition, finished with a written report. It tells you what is working, what is wearing out and what to fix first. It suits a grill you are about to start using again, one that has sat unused, or a house you just bought with a grill in the yard.
Most homes should have the grill deep cleaned every 6 to 12 months. If you grill several times a week, go closer to six. Between visits, brush the grates after each cook and empty the drip tray.
The Protection Plan is a membership for scheduled cleanings, so the grill gets serviced on a regular cycle without you having to remember to book.
Wear and tear
What wears grills out here
San Fernando is inland, so salt air is not the issue. The usual trouble is long stretches of heat and dust. Dust and debris settle into burner ports and the firebox, and a grill that sits uncovered through summer collects it fast.
Spiders are the other regular problem. They crawl into the venturi tubes, especially on grills that are used less often, and nest there. A cover helps, and so does a yearly cleaning that clears the tubes before they cause uneven flames.
When it's time to replace
When a new grill makes more sense
Some grills are past fixing. The firebox has rusted through, the frame is failing, or the repair bill would come close to the price of a replacement. When that is the case, we say so plainly.
If you decide to replace it, we measure the cutout or the space, sell you a grill that fits, install it and haul the old one away. You do not have to sort out sizing, gas hookup or disposal on your own.

What to expect
What a visit looks like
- You book online and pick a time that works
- The technician arrives with tools and common parts
- We look the grill over and tell you what we find before starting
- We clean, repair or both, depending on what the grill needs
- We test the burners and ignition and clean up our work area
- You get a summary of what was done and what to watch for

