Mobile service
We come to you in Sylmar
Pro Grill is a mobile service. A technician pulls up to your house, sets up next to the grill and does the work right there. Nothing gets loaded into a truck bed, and you never have to haul a greasy firebox to a shop.
That matters most for built-ins. A grill set into a block or stone island isn't going anywhere, so we work on it where it sits.
We cover all of Sylmar, including Olive View, Rancho Sylmar, Oakridge Estates, Kagel Canyon, Lopez Canyon and the streets around Sylmar Park. We started in Southern California in 2018 and have serviced over 25,000 grills since. Our team has 50+ years of combined grill experience, we're insured, and we have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep grill cleaning
A deep cleaning is more than a scrape and a wipe. We take the grill apart, clean each piece and put it back together working properly. Here is what's included:
- Cooking grates, scrubbed and cleared of baked-on residue
- Burners, with ports cleared so the flame is even
- Heat plates or flavorizer bars
- Briquette trays and any ceramic or lava rock
- Firebox, scraped out from the bottom up
- Drip tray and grease management system
- Igniter electrodes, cleaned so they spark where they should
- Hood interior and the outside stainless steel
- Cleanup of our work area when we're done
Buildup is not just a looks problem. Old grease feeds flare-ups and can catch fire inside the cabinet. Carbon clogs burner ports, which gives you uneven heat and cold spots on the grates. Grease holds moisture against metal, so rust starts sooner, and burners that sit in that mess rot out from the outside in. A clean grill lights easier, cooks more evenly and lasts longer.

Start with the symptom
BBQ repair for Sylmar grills
Most grill trouble comes down to a handful of parts: burners, valves, igniters, regulators, grates, heat plates and knobs. These are the problems we see most, and what we do about them.
Low heat or a weak flame
Usually a regulator problem, clogged burner ports or a partly blocked gas path. We test the pressure, clean what's clogged and replace whatever has failed.
Spiders in the burner tubes
Spiders and their webs and nests build up in the venturi tubes and block the gas and air mix. You get yellow flames, a flame that backs up toward the knobs or a burner that won't light. We clear the tubes and check the burner for damage.
Flare-ups and grease fires
Grease on the heat plates, in the firebox and in the drip tray is the fuel. We strip it out, replace heat plates that have worn thin and check that grease drains the way it should.
Stuck in low-flow mode
Many regulators have a safety bypass that trips and limits gas flow, so the grill never gets hot. We reset it the right way and replace the regulator if it keeps tripping.
Igniter clicks, grill won't light
The cause is a dead battery, a dirty or cracked electrode, a loose wire or a failed igniter module. We find which one it is and fix that part.
Smells like gas
Shut the gas off at the tank or the valve and don't light the grill until it's been checked. We pressure-test the hoses, fittings and valves, find the leak and repair it.
Burned-through trays and heat shields
Briquette trays and heat shields take the most heat and eventually crack or burn through. That leaves hot spots and lets drippings reach the burners. We cut and fit replacements for most grills.
Repair it right
We diagnose before we replace parts
The same symptom can have several causes. A grill that won't get hot might need a new regulator, or it might just need its tubes cleared. A grill that won't light might have a bad igniter, or a spider web. Replacing the wrong part wastes your money and leaves the problem in place, so we check first and fix what's actually broken.
If you're booking a repair, take a photo of the model and serial number label on your grill. It's usually on the frame, inside a cabinet door or on the back panel. With that, we can plan for the right parts before we arrive.
Our truck carries parts for most brands, so many repairs are finished in one visit. When we need something we don't have on hand, store.progrill.com carries parts for most built-in grills.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When one part fails on a built-in, repair is usually the smarter move. The grill head is often solid stainless steel that has years left in it, while a burner, igniter or valve is a small piece of the cost. Swapping the grill means cutting into the island, and your countertop and cabinets are already built around the old cutout. We fix the part and keep the kitchen you have.
We also design, fabricate and repair outdoor kitchens. That covers islands, counters, access doors, side burners and the gas and electrical lines that serve them.
Smokers, griddles, pizza ovens, fireplaces and fire pits get the same attention. If it burns gas or wood in your backyard, we can usually look at it on the same visit.

Inspections & maintenance
Inspections and regular maintenance
An inspection is a full check of the gas system, burners and ignition, finished with a written report. You get a clear list of what's fine, what's wearing and what needs work. It's useful before a big cookout, after a grill has sat unused for a while or when you're buying a house with a built-in.
For cleaning, most homes do well with a visit every 6 to 12 months. If you grill several times a week, or cook fatty foods often, go closer to six months or sooner.
If you'd rather not keep track, our Protection Plan membership sets up scheduled cleanings so they happen without you having to remember.
Wear and tear
What wears grills out in Sylmar
Sylmar is inland, so heat, dust and spiders do most of the damage to grills here. Dust and debris settle into burner ports and gather around the control panel. Spiders move into the venturi tubes, especially on grills that sit unused for a few weeks. Both cut the gas and air supply and cause weak flames and burners that won't light.
Heat takes its toll on the rest. Grill covers trap heat, and thin heat plates, briquette trays and igniter wiring wear out faster over long hot seasons. A cleaning and a quick burner check at the start of grilling season catches most of it.
Start with the symptom
New grills when repair doesn't make sense
Sometimes a grill is past saving: the firebox has rusted through, the frame is warped or the repair would cost more than the grill is worth. In that case we say so plainly.
If you decide to replace it, we measure the cutout or the space, help you pick a grill that fits, sell it and install it. We haul the old grill away when we're done, so you aren't left with it in the yard.

What to expect
What a visit looks like in Sylmar
- You book online or by phone and tell us what the grill is doing.
- A technician arrives in the window we gave you and looks at the grill.
- We explain what we found and what it needs before any work starts.
- We clean or repair the grill at your home, using parts from the truck when we have them.
- We test that it lights and burns evenly, then clean up our work area.
- You get a summary of what we did and what to watch for next.

