Mobile service
We come to you in Palm Beach
Nobody wants to haul a greasy grill into a truck. You don't have to. Our technicians bring the tools, the cleaning supplies and a stocked truck to your driveway, patio or poolside kitchen, and do the work at the grill.
This matters most for built-ins. A grill set into a stone or stucco island is not going anywhere, and a shop can't service it. We can, and we do it in place.
We cover the Estate Section, Midtown, the North End, the South End, Everglades Island, Phipps Plaza and Bradley Park, along with the other streets on the island. Pro Grill is insured, and our team has 50+ years of combined grill experience.
Deep cleaning
Deep grill cleaning
A deep cleaning is not a quick scrape and a wipe. We take the grill apart, clean each part and put it back together. Here is what's included:
- Cooking grates, scrubbed and cleaned of baked-on residue
- Burners, with every port cleared so the flame burns evenly
- Heat plates or flavorizer bars, cleaned or flagged if they are burned through
- Briquette trays and the burner box
- Firebox, scraped out from the bottom up
- Drip tray and grease management system, emptied and cleaned
- Igniter electrodes, cleaned and checked for a good spark
- Hood and outside stainless, cleaned and wiped down
- Cleanup of our work area when we're done
Buildup is more than an eyesore. Old grease feeds flare-ups and can catch fire inside the firebox. Clogged burner ports give you uneven heat, so one side scorches while the other barely cooks. Grease and moisture sitting on metal speed up rust, and burners that stay coated eventually rot out. A clean grill is safer to use and its parts last longer.
We don't promise a cleaning will make an old grill look or run like it did new. We promise a thorough job and an honest report on what we find.

Start with the symptom
BBQ repair in Palm Beach
Most grill problems come from a small part that has worn out. We repair burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators at your home, and most jobs are finished in one visit. These are the problems we see most often here.
Grates rusting or flaking
Salt air and moisture attack cast iron and plated steel grates. We clean what can be saved and replace grates that are flaking into your food.
Igniter clicks but won't light
Usually the electrode tip is corroded or coated with grease, or the wire or module has failed. We clean or replace the failed piece and test the spark.
Knobs and valve stems seized
Rust locks a stem in place, or the knob spins without opening the gas. We free up or replace the valve and the knob, depending on the damage.
Burners rusted through
Holes and flaking along the burner tube lead to weak flames and flashback. Once a burner is rotted out, cleaning won't fix it. We fit a new one.
One burner weaker than the rest
Clogged ports, a blocked venturi tube or a regulator problem are the usual causes. We find which one it is and fix it.
Grill won't stay lit
A flame that drops out often points to a tired regulator, a thermocouple on its way out, or a blocked gas path. We test the pressure first and go from there.
Smells like gas
Shut the gas off at the tank or the line, and don't light the grill until it has been checked. Leaks usually come from a worn hose, a loose fitting or a failing valve, and we trace and replace the culprit.
Hood hinges and handles corroding
Salt air eats at hardware first. We replace stiff or broken hinges and loose handles so the lid opens and closes the way it should.
Repair it right
We diagnose before you buy parts
The same symptom can come from several different causes. A weak flame might be a dirty burner, a regulator in bypass mode or a bad hose. Guessing means paying for parts you didn't need, so we check first, then tell you what the problem is and what it will take to fix it.
If you'd like to get a head start, take a photo of the model and serial number label on your grill, usually inside a door or on the back or side, and send it when you book. It lets us arrive with the right parts.
Our truck carries parts for most brands. For anything we don't have on board, store.progrill.com stocks parts for most built-in grills, so you can order the part yourself or let us get it.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When one part fails on a built-in, repair almost always makes more sense than replacing the grill. The island, the cutout and the gas line are already in place, and a new burner, valve or igniter costs far less than redoing the kitchen around a new unit. We tell you straight when a grill has reached the end of its life, but we don't push replacement when a repair will do.
We also design, build and repair outdoor kitchens, including islands, counters and the work around the grill. If a cabinet door has dropped or a counter needs attention, we handle it.
Grills aren't the only equipment we service. We also work on smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas supply, burners and ignition, with a written report you can keep. It's useful if you're buying or selling a house with an outdoor kitchen, or if the grill has sat unused and you want to know it's safe before the next cookout.
Most homes need a cleaning every 6 to 12 months. If you grill several times a week, you'll want it closer to six. If you rarely use it, once a year can be enough.
The Protection Plan membership puts those cleanings on a schedule, so you don't have to remember. We come back when it's due.
Wear and tear
What wears grills out in Palm Beach
Palm Beach sits on a barrier island, and salt air is the biggest factor. It settles on every surface of a grill and speeds up rust on burners, grates and hardware. It pits and stains stainless steel and corrodes igniter tips and valve stems.
Humidity makes it worse by keeping moisture on the metal. Grills that sit closed up between uses often show damage inside long before the outside looks bad. Regular cleaning and a quick look at the burners and electrodes catch most of this early.
When it's time to replace
New grills in Palm Beach
Sometimes repair doesn't make sense. The firebox is rusted through, the frame has failed or parts are no longer made. When that happens, we help you replace it.
We measure the cutout so the new grill fits, sell you the grill, install it and haul the old one away. For built-ins, getting the measurements right the first time avoids a lot of trouble, since a unit that's a half inch too big won't go in.

What to expect
What a visit looks like
- You book online and tell us what the grill is doing. A photo of the model label helps.
- A technician arrives in the window we give you.
- We look the grill over and tell you what we find before we start work.
- We clean, repair or both, working at the grill.
- We test the ignition and flame, then clean up our work area.
- You get a summary of what was done and what to watch for next.

