Mobile service
We Come to You in Riviera Beach
Pro Grill is a mobile service. A technician drives to your house, sets up next to the grill and does the cleaning or repair right there. Nothing gets hauled to a shop, and no greasy grill rides in the back of your car.
This matters most for built-ins. A grill set into a stone or stucco island is not going anywhere, and it shouldn't have to. We work on it where it sits.
We serve Singer Island, Ocean Reef, Palm Beach Isles, Monroe Heights, the Marina District, Park Manor and the streets around them. Pro Grill started in Southern California in 2018, now also works in Arizona, and has serviced more than 25,000 grills. We're insured, and we have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep Grill Cleaning
A deep clean is much more than a scrub of the grates. We take the grill apart as far as it safely goes, clean every piece, put it back together and test it before we leave.
- Cooking grates, scraped and washed
- Burners, with ports cleared and tubes checked
- Heat plates or flavorizer bars
- Briquette trays
- Firebox, scraped out from the bottom up
- Drip tray and grease management system
- Igniter electrodes, cleaned and checked for spark
- Hood and outside stainless, wiped down and polished
- Cleanup of our work area when we're done
Buildup is not just a looks problem. Grease in the firebox feeds flare-ups. Clogged burner ports give you uneven heat, with one side of the grate scorching and the other barely warm. Wet ash and drippings hold moisture against metal and speed up rust. Left long enough, they rot out burners that would otherwise have lasted years.
A cleaning makes a grill safer and more even to cook on. It does not undo parts that are already worn, and if we find one, we'll tell you.

Start with the symptom
BBQ Repair at Your Riviera Beach Home
Most repairs are done in one visit. We replace burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators, and we carry the common ones on the truck. These are the problems we see most often.
Igniter clicks or sparks weakly
Salt and moisture corrode the electrode tip and the wire connection, so the spark never reaches the burner. We clean or replace the electrode, check the wiring and test the spark.
Burner rusted through
Salt air eats burners from the outside, and grease eats them from the inside. Holes and flaking mean it's time for a new burner. We fit the right one and check the flame afterward.
Grates rusting or flaking
Surface rust can be cleaned and re-seasoned. Grates that are flaking, thin or cracked should be replaced before they drop bits of metal into your food.
Knobs and valve stems seized
Corrosion locks the stem, and forcing it can snap it. We free it up if we can, or replace the valve or knob if it has gone too far.
Smells like gas
Shut the gas off at the tank or the line and do not light the grill until it has been checked. Common causes are a loose fitting, a cracked hose or a leaking valve. We test every connection and replace what's faulty.
One burner is weak
A blocked port, a spider nest in the venturi tube or a tired regulator is usually the cause. We clear the blockage and test the others on the same line.
Yellow, lazy flames
The flame should be mostly blue and steady. Yellow usually means a restricted air mix from debris or a nest in the tube. We clean it out and adjust.
Heat shields burned through
Briquette trays and heat shields take the drippings, and eventually they give out. Once they do, burners get hit by grease and flare-ups follow. We swap them for the right size.
Repair it right
We Diagnose Before You Buy Parts
The same symptom can come from different causes. A grill that won't light might need a new igniter, or it might need a clean burner, a new regulator or a fresh tank. Guessing means paying for parts you didn't need.
So we check first, then tell you what we found and what it will take to fix it. The truck carries parts for most brands. If your grill needs something we don't have on hand, parts for most built-in grills are available at store.progrill.com.
When you book, send a photo of the model and serial number label. It's usually on the frame, inside a cabinet door or near the gas connection. With it, we can arrive with the right parts the first time.
Built-ins & outdoor kitchens
Built-in Grills and Outdoor Kitchens
When one part fails on a built-in, repair is almost always the better call. The island, the countertop and the gas line cost far more than the part, and swapping a built-in means cutting into all of it. A new burner, valve or igniter gets you cooking again without touching the masonry.
We also design, fabricate and repair outdoor kitchens: islands, cabinets, countertops, doors and drawers, and the appliances that go in them. Smokers, griddles, pizza ovens, fireplaces and fire pits are part of the same work, and we service those as well.

Inspections & maintenance
Inspections and Regular Maintenance
A grill inspection is a full check of the gas supply, hoses, valves, burners and ignition. You get a written report, so you know what's fine, what's wearing and what needs work. It's useful before a big cookout, after a long stretch of no use, or when you're buying a house with a grill in the yard.
Most homes should have a deep cleaning every 6 to 12 months. If you grill several times a week, plan on the shorter end.
The Protection Plan is a membership for scheduled cleanings. We set up the visits, and you don't have to remember to call.
Wear and tear
What Wears Grills Out in Riviera Beach
Salt air is the main enemy for grills here. Close to the water, it settles on everything and rusts burners, grates and hinges faster than you'd expect. It pits and stains stainless steel, and it corrodes igniter tips until they stop sparking.
Humidity adds to it. Moisture sits in the firebox and inside the burner tubes, so a grill left uncovered between cookouts ages quickly. A regular cleaning and a good cover slow all of that down.
When it's time to replace
When a New Grill Makes More Sense
Sometimes repair doesn't add up. A firebox rusted through, a cracked casting or a grill that needs several major parts at once is usually better replaced.
When that's the case, we'll say so plainly. We measure the cutout or the space, sell you a grill that fits, install it and haul the old one away.

What to expect
What a Visit Looks Like
- You book online and tell us what the grill is doing. A photo of the model and serial label helps.
- The technician arrives in the window we give you and looks over the grill.
- We explain what we found and what needs doing before we start.
- We clean, repair or both, then test the grill.
- We clean up our work area and go over what we did.

