Mobile service
We come to you in Palm Beach Gardens
Our technicians drive to your house with the tools, cleaning gear and common parts on the truck. Cleaning and repair both happen where the grill sits: the back patio, the lanai, the side yard or the outdoor kitchen.
Nobody has to wrestle a greasy grill into a car or wait for a shop to call back. That matters most for built-ins, which are set into an island and are not going anywhere. Freestanding gas grills and cart models get the same service at the same visit.
We cover homes across the city, including PGA National, BallenIsles, Mirasol, Frenchman's Creek, Old Palm, Evergrene, Eastpointe, Steeplechase and Prosperity Oaks, and the streets around them. We have serviced over 25,000 grills since 2018, and we have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
What a deep grill cleaning covers
A deep cleaning is more than a scrape and a wipe. We take the grill apart far enough to reach the places grease and carbon hide.
- Cooking grates, scrubbed and rinsed
- Burners, cleaned and the ports cleared
- Heat plates or flavorizer bars
- Briquette trays and briquettes
- The firebox, scraped down to bare metal where we can
- Drip tray and grease management system
- Igniter electrodes, cleaned so they spark cleanly
- Hood and outside stainless, wiped and polished
- Cleanup of our work area when we finish
Buildup is not just ugly. Old grease feeds flare-ups and can catch fire. Clogged burner ports cause uneven heat, so one side scorches while the other stays pale. Grease and moisture trapped against metal speed up rust, and burners that sit in that mess rot out sooner than they should. A cleaning does not undo damage that has already happened, but it slows the next round.

Start with the symptom
BBQ repair at your Palm Beach Gardens home
Most grill problems come down to a worn part, a blocked passage or a corroded connection. Here are the ones we see most, and what we usually do about them.
Grates rusting or flaking
Moisture and old grease break down the coating on grates, and the rust flakes onto your food. We clean what can be saved and replace grates that have pitted through.
Igniter clicks but nothing lights
Usually the electrode tip is corroded or coated with grease, or the spark is landing in the wrong place. We clean or replace the electrode, check the wire and test the module.
Knobs seized or valve stems stuck
Rust and baked-on grime lock up the stem behind the knob. We free it up when we can and replace the valve or knob when it will not turn smoothly.
Burner rusted through
Holes and flaking metal along the burner tube mean it is done. We fit a matching burner and check the flame pattern before we leave.
One burner weaker than the rest
Blocked ports, a spider nest in the venturi tube or a tired regulator are the usual causes. We clear the passage and test the gas flow to find which it is.
Won't get past 300 degrees
This is often a regulator stuck in low-flow mode, or a gas supply problem. We check the regulator and hose, then the burners, before replacing anything.
Yellow or lazy flames
A healthy flame is mostly blue and snaps along the burner. Yellow, floppy flames point to an air mixture problem, such as a blocked venturi or dirty ports. We clean them out and retest.
Smells like gas
Shut the gas off at the tank or the line and do not light the grill until it has been checked. We test the hose, fittings and valves for leaks and replace what is failing.
Repair it right
We diagnose before we buy parts
The same symptom can have different causes. A grill that will not light might need a new igniter, a clean electrode, a regulator or just a fresh tank. Guessing means paying for parts you did not need, so we check first and replace only what is actually failing.
It speeds things up if you send a photo of the model and serial number label before the visit. It is usually on the frame, inside a cabinet door or on the back panel. The truck carries parts for most brands, and more are available at store.progrill.com when a part has to be ordered.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When one part fails on a built-in, repair is almost always the better call. The grill is already set into the countertop, the gas line is run and the island is built around it. Swapping a burner, valve or igniter costs far less than cutting out and replacing the whole unit.
We also design, fabricate and repair outdoor kitchens: islands, counters, doors, drawers and the grill inside them. If a cabinet door has sagged or a drawer track has rusted, we can look at that during the same visit.
Beyond gas grills, we service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas connections, burners and ignition, finished with a written report. It suits a grill you are buying used, one that has sat unused for a season or one you just want checked before the weekend crowd arrives. The report lists what is fine, what is wearing and what needs attention.
Most homes do well with a deep cleaning every 6 to 12 months. If you grill several times a week, or cook fatty meats, go closer to six.
The Protection Plan is a membership for scheduled cleanings. We come on a regular cycle so you do not have to remember, and the grill never gets a chance to get that far gone.
Wear and tear
What wears grills out in Palm Beach Gardens
Palm Beach Gardens is close enough to the Atlantic that salt air reaches backyard grills, and humidity is part of life here. Together they rust burners, grates and stainless, and corrode igniter tips, knobs and valve stems.
A cover helps, but it is not a cure, and a damp cover trapped over a warm grill can make things worse. Wiping down stainless, burning off the grates after use and getting a cleaning on a regular schedule keep the rust from getting ahead of you.
When it's time to replace
New grills: measured, installed, old one hauled away
Sometimes repair does not make sense. The firebox is rusted through, the frame is warped or parts cost more than the grill is worth. When that happens, we sell new grills and handle the rest.
For built-ins we measure the cutout first so the new grill fits the island. We install it, connect the gas, test it and haul the old grill away.

What to expect
What a visit looks like
- You book online and tell us what the grill is doing, plus the model if you have it.
- The technician arrives in the window we gave you and looks at the grill with you.
- We explain what we found and what it takes to fix it before any work starts.
- We clean, repair or both, then fire the grill up to test it.
- We clean up our work area and go over what we did.

