Mobile service
We Come to You in Jupiter Inlet Colony
Our technicians drive to your house with the tools and parts to clean or fix the grill where it sits. Nothing gets loaded into a truck bed and hauled to a shop.
That matters most for built-ins. A grill set into a masonry or stainless island isn't going anywhere, and it doesn't need to. We work at the island, protect your patio or pavers, and leave the area clean.
The town is small and we cover all of it, every street. Pro Grill started in Southern California in 2018 and has serviced over 25,000 grills. We have 2,500+ five-star reviews (Google, Yelp and Facebook), a team with 50+ years of combined grill experience, and we're insured.
Deep cleaning
Deep Grill Cleaning
A deep cleaning takes the grill apart and works through every part that holds grease and carbon. Here is what's included:
- Cooking grates scrubbed and cleaned
- Burners cleaned, with ports cleared
- Heat plates or flavorizer bars cleaned or flagged for replacement
- Briquette trays emptied and cleaned
- Firebox scraped out
- Drip tray and grease management system cleaned
- Igniter electrodes cleaned and checked
- Hood and outside stainless cleaned
- Our work area cleaned up when we're done
Buildup is more than a looks problem. Grease and carbon feed flare-ups, block burner ports so heat runs uneven, and hold moisture against metal so it rusts. Burners that sit in grease and damp tend to rot out early, and a burner is a part you'd rather not replace before its time.

Start with the symptom
BBQ Repair at Your Home
Most grill repairs are a single worn part, and most of them can be done in one visit. These are the problems we see most often on grills near the coast.
Hood hinges and handles corroded
Salt air eats through hinge pins, brackets and handle hardware until the lid sticks or wobbles. We free up what can be saved and replace what can't.
Burners rusted through
Moisture and salt rot burner tubes from the outside in, leaving weak spots and ragged flames. We replace the burner and check the valves and venturi tubes feeding it.
Igniter clicks but won't light
The usual causes are a corroded electrode tip, a dead battery or module, or a loose wire. We test each one and fix the one that's actually at fault.
Knobs seized or spinning loose
Rust locks valve stems, and worn knobs can slip on the stem without turning the gas. We free or replace the knob or valve and test the flame at every setting.
One burner is weak
Clogged ports, a spider nest in the venturi tube or a failing valve can all starve one burner. We clear the blockage or replace the part behind it.
Won't get past 300 degrees
This is often a regulator stuck in low-flow mode or a clogged burner. We check gas pressure first, then the burners.
Smells like gas
Shut the gas off at the tank or line and don't light the grill until it's been checked. We find the leak, usually a hose, fitting or valve, and repair it.
Repair it right
We Diagnose Before Buying Parts
The same symptom can come from different causes. A grill that won't light might need an electrode, a module, a regulator or just a cleaning. If we guessed, you'd pay for parts you didn't need, so we test first and replace only what failed.
To speed things up, take a photo of the label with the model and serial number and send it when you book. It lets us bring the right parts.
Our trucks carry parts for most brands. Anything we don't have on hand is available at store.progrill.com, which also carries parts for most built-in grills if you'd rather handle a repair yourself.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens in Jupiter Inlet Colony
When one part fails on a built-in, repair almost always makes more sense than replacement. The island, the cutout and the gas line stay as they are, and you fix the one thing that broke.
We also design, fabricate and repair outdoor kitchens, from a new grill island to a cabinet door or countertop that has had enough. Beyond grills, we service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and Maintenance
An inspection is a full check of the gas supply, burners and ignition, finished with a written report. It tells you what's fine, what's wearing, and what to fix now or later. It's useful before a big cookout or before you buy a house with a grill included.
Most homes need a deep cleaning every 6 to 12 months. If you grill several times a week, lean toward 6.
The Protection Plan is a membership for scheduled cleanings, so the grill gets done on a regular schedule and you don't have to remember to call.
Wear and tear
What Wears Grills Out Here
The town sits on the coast, and salt air is the main enemy. It rusts burners and grates, pits and stains stainless steel, and corrodes igniter tips and hood hardware.
Humidity adds to it. Moisture trapped under a grill cover keeps metal damp, and grease buildup speeds the rusting. Regular cleaning and a look at the burners and electrodes each year catch most of it before a part fails.
Start with the symptom
New Grills When Repair Doesn't Make Sense
Sometimes the firebox is rusted through or parts cost more than the grill is worth. When that happens we say so plainly. We measure the cutout or the space, sell you a new grill, install it, and haul the old one away.

What to expect
What a Visit Looks Like
- You book online and tell us the grill type and the problem.
- The technician arrives and looks the grill over with you.
- We explain what we found and what it needs before starting work.
- We clean, repair or both, and test the grill before we leave.
- We clean up our work area and go over what we did.

