Start with the symptom
Grill cleaning and repair at your Palm Beach Shores home
We work at the house. The technician pulls up with tools, cleaning gear and a truck stocked with common parts, and the job gets done next to your grill, on the patio, by the pool or in the outdoor kitchen.
This matters most for built-in grills. A built-in is bolted into masonry or a stainless island and nobody is carrying it to a shop. Freestanding and cart grills get the same service, and we also come out for smokers, griddles and pizza ovens.
We cover Palm Beach Shores, including the Ocean Avenue, Lake Drive and Edwards Lane areas, the Sailfish Marina side of town, and the rest of Singer Island nearby. We are insured, and the team has 50+ years of combined grill experience. Our customers have left us 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep BBQ grill cleaning: what we clean and why it matters
A deep cleaning goes well past scraping the grates. We take the grill apart, clean each piece and put it back together. A typical visit includes:
- Cooking grates, scrubbed and cleaned of carbon and old food
- Burners, with clogged ports cleared
- Heat plates or flavorizer bars
- Briquette trays and ceramic briquettes
- The firebox, scraped out from top to bottom
- Drip tray and grease management system
- Igniter electrodes, cleaned so they spark where they should
- The hood, plus the outside stainless
- Cleanup of our work area when we finish
Buildup is not just ugly. Old grease feeds flare-ups and can catch fire in the drip tray. Clogged burner ports give you uneven heat, with one side of the grill running hotter than the other. Grease and moisture trapped against metal speed up rust, and burners that sit in that mess rot out sooner than they should. A cleaning does not undo damage already done, but it stops the buildup from causing more.

Start with the symptom
BBQ repair: the problems we fix most
Most grill trouble comes down to a handful of parts: burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators. We repair all of them on site. These are the problems we see most often in Palm Beach Shores.
Knobs stuck or spinning freely
Salt and moisture seize knobs and valve stems, or the knob wears loose on the stem and spins without opening the gas. We free or replace the stem, the knob or the valve, depending on what failed.
Grates flaking or rusting
Bare steel and plated grates rust and shed flakes into your food. Light surface rust can be cleaned off. Grates that are pitted through or peeling should be replaced.
Burners rusted through
Air with salt in it eats burners from the outside in, and grease drips speed it up. If you see holes, flaking metal or a ragged flame, the burner needs replacing. We fit the correct one for your model.
Igniter clicks but won't light
Usually the electrode tip is corroded or coated in grease, the wire has worn through, or the battery or module is dead. We test each in order and fix the one that is actually failing.
Smells like gas
Shut the gas off at the tank or the supply line and do not light the grill until it has been checked. A leak is typically at a hose, a fitting, a regulator or a worn valve. We find it and repair it.
One burner is weak
This is often clogged ports or a spider nest in the venturi tube. It can also be a failing regulator or a burner that has started to rust. We clear it, test it and replace what is bad.
Won't stay lit
A flame that dies after a few seconds often points to a regulator stuck in low-flow mode, a blocked burner or a weak valve. We check gas pressure and flow before changing anything.
Hood hinge or handle corroded
Hinges seize, handles loosen and the lid stops closing square, which leaks heat. We free up or replace the hardware so the hood opens and seals properly.
Repair it right
We diagnose first, then replace parts
The same symptom can come from different causes. A grill that will not heat might have a clogged burner, a bad regulator or a failing valve. Buying a part on a guess wastes money and still leaves the grill broken.
So we test first. Then we tell you what failed and what it will take to fix it.
To speed things up, send a photo of the model and serial number label when you book. It is usually on the frame, inside the cabinet door or on the back of the grill. Our truck carries parts for most brands, and we can order more from store.progrill.com for most built-in grills.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
If one part fails on a built-in, fix that part. Replacing the whole grill means cutting into the island, and the opening may not fit a new unit. A new burner, igniter or valve costs far less than that and the grill keeps going.
We also design, fabricate and repair outdoor kitchens: islands, countertops, cabinet doors, side burners and access panels. Our technicians service fireplaces and fire pits as well.

Inspections & maintenance
Inspections and regular maintenance
A grill inspection is a full check of the gas connections, burners and ignition. You get a written report on what is fine, what is wearing and what needs work. It is useful before the season starts, after a storm, or when you are buying or selling a home with a built-in.
Most homes should have a deep cleaning every 6 to 12 months. Grill often, and you will want it closer to every 6. If you would rather not think about it, the Protection Plan membership puts scheduled cleanings on the calendar for you.
Wear and tear
What wears grills out in Palm Beach Shores
The town sits on a barrier island, and the salt air gets to everything. It rusts burners, grates, hinges and fasteners, pits stainless steel, and corrodes igniter tips and valve stems. Humidity adds to it, especially on grills that stay shut and damp between uses.
Wipe down the stainless, keep the grill covered when you are not using it, and clean grease out before it sits. Even then, parts here wear faster than they would inland, so a yearly check is worth it.
Start with the symptom
New grills when repair doesn't make sense
Sometimes a grill is too far gone. The firebox has rusted through, the frame is failing or parts are no longer made. When that happens, we say so plainly.
We sell new grills, measure your cutout or patio space so the new one fits, install it and haul the old one away.

What to expect
What a visit looks like
- You book online or by phone and tell us what the grill is doing.
- A technician arrives in the window we gave you.
- We look the grill over and test the problem.
- We explain what we found and what it needs.
- We clean, repair or both, on site.
- We test the grill, clean up our work area and go over what we did.

