Mobile service
We Come to You in West Palm Beach
Our technicians drive to your house with the tools and parts to work on the grill where it sits. Nothing gets loaded into a truck bed, and you never haul a greasy grill to a shop.
This matters most for built-ins. A grill set into a stone or stucco island isn't going anywhere, so the work happens in the island, on your patio.
We cover Flamingo Park, El Cid, Northwood, Northwood Hills, Grandview Heights, Prospect Park, Pineapple Park, Southland Park and the rest of the city. Pro Grill started in Southern California in 2018, has serviced over 25,000 grills, and has 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep Grill Cleaning, Start to Finish
A deep clean means taking the grill apart, not wiping down the grates and leaving. Here is what we go through:
- Cooking grates scrubbed clear of carbon and old residue
- Burners cleaned, with the ports cleared of debris
- Heat plates or flavorizer bars scraped and checked for burn-through
- Briquette trays emptied and cleaned
- Firebox scraped of caked grease and carbon
- Drip tray and grease management cleared out
- Igniter electrodes cleaned so the spark lands where it should
- Hood and outside stainless cleaned and wiped down
- Our work area cleaned up before we leave
Buildup is more than a looks problem. Old grease feeds flare-ups and can start a grease fire. Carbon on the burners and clogged ports give you uneven heat, with one side scorching and the other barely warm. Grease and ash also hold moisture against metal, which starts rust, and burners sitting in that mess rot out sooner than they should.

Start with the symptom
BBQ Grill Repair
Most repairs finish in one visit because the truck carries common parts. These are the problems we see most often on grills near the coast.
Igniter clicks but nothing lights
Salt and moisture corrode the electrode tip until the spark can't jump. We clean or replace the electrode, then check the wire and the module.
A burner has rusted through
Humid, salty air eats burners from the outside, and grease eats them from the inside. We replace the burner and check the neighboring ones for the same wear.
Knobs are seized
Rust locks the knob or valve stem so it won't turn, or it spins freely. We free it, replace the stem or valve if it's worn, and make sure the flame responds.
Hood hinges and handles are corroding
Hinges stiffen and handles pit and loosen over time. We replace the worn hardware so the hood lifts and closes properly.
Grates are rusting or flaking
Bare cast iron and thin plated grates flake once the coating is gone. We replace them with a matching set for your model.
One burner is weak
A clogged port, a spider nest in the venturi tube, or a failing valve are the usual causes. We clear the blockage or replace the part that's failing.
Won't get past 300 degrees
This is often a regulator stuck in low-flow mode, or a burner choked with debris. We test the gas pressure and fix whichever one is holding it back.
Smells like gas
Shut the gas off at the tank or the line and don't light the grill until it's been checked. We test the hose, fittings, valves and regulator for leaks and repair what we find.
Repair it right
We Diagnose Before You Buy Parts
The same symptom can come from different problems. A grill that won't light might need a new electrode, a battery, a regulator or a cleaned burner. Guessing means paying for parts that don't fix it.
So we check first. Before we arrive, take a photo of the label with your model and serial number. It's usually on the frame, inside a cabinet door or on the back of the grill, and it lets us bring the right parts.
The truck carries parts for most brands. If something needs to be ordered, store.progrill.com stocks parts for most built-in grills.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens in West Palm Beach
When one part fails on a built-in, repair is almost always the better call. The island, the countertop and the gas line stay as they are, and we replace the burner, valve, igniter or heat plate that quit. Replacing the whole grill means cutting into the cabinetry and paying for a lot more than the broken part.
We also design, fabricate and repair outdoor kitchens: islands, cutouts, doors, drawers, and the grill, side burner and storage that go in them. Smokers, griddles, pizza ovens, fireplaces and fire pits get the same service, at your home.

Inspections & maintenance
Grill Inspections and Regular Maintenance
An inspection is a full check of the gas supply, burners and ignition, with a written report of what's working, what's wearing and what needs attention. It's useful before a big cookout season, when you move into a house with a grill, or before you decide whether to repair or replace.
Most homes need a deep clean every 6 to 12 months. If you grill several times a week, plan on the shorter end.
The Protection Plan is a membership for scheduled cleanings, so the grill is on our calendar instead of on your to-do list.
Wear and tear
What Wears Grills Out in West Palm Beach
Salt air and humidity do the damage here. They rust burners, grates and heat plates, pit stainless steel, and corrode igniter tips and valve stems.
Grills that sit uncovered or go unused for weeks show it first. A cover, regular cleaning and a quick look at the burners and electrodes each season slow the damage down.
When it's time to replace
New Grills: Measured, Installed, Old One Hauled Away
When repair doesn't make sense, we measure the cutout, sell you a grill that fits, install it and haul the old one away.

What to expect
What a Visit Looks Like
- You book online and we confirm a time window.
- The technician arrives, looks over the grill and checks the label.
- We tell you what we found and what the work involves before we start any repair.
- We clean, repair or both, working at the grill.
- We clean up our work area and go over what we did.

