Mobile service
We come to you in Tequesta
Pro Grill is a mobile service. A technician pulls up with the tools, cleaning gear and a truck stocked with parts, and the work happens at your house. You don't haul a greasy grill to a shop, and nothing messy rides in your car.
That matters most for built-ins. A grill set into a stone island or a cabinet run isn't going anywhere, so we work in place. We cover Tequesta Country Club, Bermuda Terrace, Constitution Hills, Old Tequesta, Beacon 21, the streets around Tequesta Park and the neighborhoods in between.
We started in Southern California in 2018, work in Arizona too, and have serviced over 25,000 grills. The team has 50+ years of combined grill experience, and we're insured. We have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep grill cleaning
A deep clean is a lot more than a wire brush on the grates. We take the grill apart, clean each piece and put it back together. Here is what's included:
- Cooking grates cleaned and checked for rust, cracks and loose welds
- Burners removed, brushed out and inspected, with every port cleared
- Heat plates or flavorizer bars scraped and checked for burn-through
- Briquette trays and whatever sits in them, cleaned or flagged for replacement
- Firebox scraped free of baked-on carbon and grease
- Drip tray and grease management system emptied and cleaned
- Igniter electrodes cleaned and tested
- Hood interior and outside stainless cleaned
- Our work area cleaned up before we leave
Buildup does real damage. Grease in the firebox feeds flare-ups and can catch fire. Clogged burner ports give you uneven heat, with a hot side and a cold side. Moisture trapped under carbon and grease rusts metal faster, and burners sitting in that mess rot out from underneath.
A cleaning won't fix a burner that has already gone thin, but it shows us which parts are close to the end so you hear about them before they fail.

Start with the symptom
BBQ repair in Tequesta
Most grill problems come down to a handful of parts: burners, valves, igniters, grates, heat plates, knobs and regulators. We repair all of them at your home. These are the ones we see most often.
Burners rusting through
Salt air and moisture eat burners from the outside in, leaving holes and flaky metal that make flames uneven. We replace the burner and check the heat plates above it, which are usually worn too.
Knobs that seize or spin
Corroded valve stems lock a knob in place, and a worn stem lets it spin without opening the gas. We free or replace the stem or valve, and fit a new knob if the old one is cracked.
Igniter clicks, no flame
Corroded or dirty electrode tips, a loose wire or a dead module are the usual causes. We test the spark, then clean or replace whichever part has failed.
Grates rusting and flaking
Bare cast iron and thin plated steel rust quickly in humid air, and once the surface flakes it won't season again. We replace grates that are past saving and tell you plainly when a clean-up is enough.
Hood hinges and handles corroding
Salt gets into hinge pins and handle hardware first. A stiff hood or a wobbling handle gets new hardware, and we check that the lid still closes square.
One burner is weak
Blocked ports, a spider nest in the venturi tube or a tired valve will starve a single burner. We clear the tube and ports, then test the valve and replace it if the flame is still low.
Smells like gas
Shut the gas off at the tank or the supply valve and don't light the grill until it has been checked. Leaks usually come from a hose, a fitting, a regulator or a valve, and we pressure-test the connections to find which.
Repair it right
We diagnose before we replace anything
The same symptom can have different causes. A grill that won't hold heat might need a regulator, a burner or just a cleaning. We check first so you aren't paying for parts you didn't need.
It speeds things up if you take a photo of the model and serial number label before we arrive. It's usually on the frame, inside a cabinet door or on the back panel. With that we can match parts to your exact grill.
Our truck carries parts for most brands, so many repairs are done on the first visit. When a part has to be ordered, most built-in grill parts are also available at store.progrill.com.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens in Tequesta
When one part fails on a built-in, repairing it is usually the better move. Replacing the grill means new cutout measurements, possible changes to the island and a lot of cost and mess. A new burner, valve or igniter gets the grill working again with the island untouched.
We also design, fabricate and repair outdoor kitchens: islands, counters, cabinets, doors and drawers, and the grill and side burner set into them. If your outdoor kitchen needs a fix or a rework, we can look at the whole thing in one visit.
Besides gas grills, we work on smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
An inspection is a full check of the gas supply, burners and ignition. You get a written report listing what's fine, what's wearing and what needs attention now. It's useful before a big cookout, after a grill has sat unused or when you're deciding whether an older grill is worth fixing.
Most homes should have a deep cleaning every 6 to 12 months. If you grill several times a week, lean toward the short end of that range.
If you'd rather not keep track, the Protection Plan membership puts scheduled cleanings on the calendar so they happen without you having to remember.
Wear and tear
What wears grills out here
Tequesta is close enough to the coast that salt air reaches patios and lanais. Salt and humidity rust burners and grates, pit stainless, seize valve stems and knobs, and corrode igniter tips. A grill that sits under a cover in damp air can rust faster than one that is used and wiped down.
Heat and humidity also keep grease soft and sticky, so buildup grows quickly. Rinsing salt off the stainless, keeping the cover dry underneath and getting regular cleanings all slow the damage, but burners and grates are wear parts and will eventually need replacing.
When it's time to replace
When a new grill makes more sense
Sometimes repair stops making sense: the firebox has rusted through, the frame is failing or the repair would cost more than the grill is worth. We tell you that straight.
If you decide to replace it, we measure the cutout or the space, sell you a new grill, install it and haul the old one away. You don't have to find a way to get rid of it.

What to expect
What a visit looks like
- You book online and we confirm a time window.
- The technician arrives and looks over the grill with you.
- We diagnose the problem and tell you what we found before doing any repair work.
- We clean, repair or both, using parts from the truck where we can.
- We test the burners and ignition, clean up our work area and go over what we did.
- If you ordered an inspection, you get the written report.

