Mobile service
We come to your Westlake home
Every job is done at your house, on your patio or beside your outdoor kitchen. You do not haul a greasy grill anywhere, and you do not wait weeks for a shop to get to it.
This matters most for built-ins. A grill set into masonry or a counter is not coming out, and it should not have to. Our technician works from the front, pulls the parts that come out, and services the rest in place.
We cover Westlake Landings, Grove Park, Sky Cove and the other Westlake neighborhoods. If you live in Westlake and are not sure you are in our route, book online and we will confirm.

Deep cleaning
Deep grill cleaning
A deep cleaning is more than a scrape and a wipe. We take the grill apart as far as it safely goes and clean each part that holds grease or burns. A visit includes:
- Cooking grates, scrubbed and checked for cracks or heavy rust
- Burners, cleaned and cleared of blocked ports
- Heat plates or flavorizer bars, scraped and inspected
- Briquette trays and ceramic or lava rock where the grill uses them
- Firebox, scraped out from the bottom up
- Drip tray and grease management system, emptied and cleaned
- Igniter electrodes, cleaned so the spark reaches the burner
- Hood and outside stainless, cleaned and wiped down
- Cleanup of our work area when we finish
Buildup is not just ugly. Old grease feeds flare-ups, and a grease fire in a firebox can damage a grill and the counter around it. Clogged burner ports give uneven heat, so one side scorches while the other stays pale. Grease and moisture held against metal speed up rust. Burners that sit in that mess can rot out long before they should.
A cleaning gets the grill back in good working order. It does not make an old grill new, and if we find a part that has gone too far, we tell you before anything else happens.

Start with the symptom
Common BBQ repairs we handle
Most grill problems come down to a worn part, a blocked passage or a bad connection. These are the ones we see most often at homes here.
Low flame, even on high
A regulator stuck in low-flow (bypass) mode limits the gas, so the flame stays weak. We reset it if it will reset, or replace it if it will not.
Hot spots and uneven heat
Blocked burner ports, a warped heat plate or a crooked burner usually cause this. We clean the ports, check the alignment and replace what is worn.
Spiders in the venturi tubes
Spiders and insects nest in the tubes that feed gas to each burner. The flame turns yellow, lazy or flashes back toward the knobs. We clear the nest and check the tubes before the grill goes back into use.
Flare-ups and grease fires
Grease built up on the heat plates and in the drip tray is the usual fuel. We clean it out and replace any plates that are burned through.
Igniter clicks but nothing lights
The spark may be weak, the electrode dirty or the wire loose, or the burner may not be getting gas. We test each part in order and replace the one that failed.
Knob spins without turning on the gas
The knob has slipped off the valve stem or the valve itself is worn. We replace the knob, the valve or both.
Smells like gas
Shut the gas off at the tank or the line and do not light the grill until it has been checked. Leaks usually come from a hose, a fitting or a valve, and we find the source and fix it.
Repair it right
We diagnose before you buy parts
The same symptom can have several causes. A grill that will not light might need a new igniter, or it might only need a clean electrode or a fresh tank. Replacing parts by guess costs money and often fixes nothing.
So we check first. We test the gas flow, the spark and the burners, then tell you what is wrong and what it takes to fix it.
To speed things up, take a photo of the model and serial number label on your grill and send it when you book. The label is usually on the frame, inside a cabinet door or on the back of the unit. Our truck carries parts for most brands, and more are available at store.progrill.com when a part has to be ordered.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens in Westlake
When one part fails on a built-in, replacing the whole grill is rarely the answer. A new unit means cutting counters or reworking the island, and the old frame is often sound. A new burner, valve or igniter usually costs far less than that and gets you cooking again.
We also design, fabricate and repair outdoor kitchens. That covers islands, counters, access doors, drawers and the grill space itself. If you are planning a new setup or fixing an old one, we can look at what you have and tell you what makes sense.
Grills are not all we work on. We also service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
An inspection is a full check of the gas supply, the burners and the ignition. You get a written report of what we found, what is worn and what can wait. It is useful before a big cookout, when buying a house with an outdoor kitchen, or when a grill has sat unused.
Most homes do well with a deep cleaning every 6 to 12 months. If you grill several times a week, plan on the shorter end.
If you would rather not keep track, the Protection Plan membership sets up scheduled cleanings so the grill stays on a regular routine.
Wear and tear
What wears grills out in Westlake
Westlake is inland, so the trouble here is mostly humidity, heat and dust. Moisture sits on metal and speeds up rust on burners, grates and control panels. Dust and debris settle into burner ports and slowly choke the flame.
The other common problem is insects. Spiders and other bugs move into the venturi tubes, especially in a grill that is covered and idle for a few weeks. A quick check of the tubes and burner ports before the season starts saves a lot of frustration.
When it's time to replace
When it is time for a new grill
Sometimes repair stops making sense. The firebox may be rusted through, the frame may be bent, or the parts may cost more than the grill is worth. When that happens we say so plainly.
If you decide to replace it, we measure the cutout or the space, sell you a new grill, install it and haul the old one away.
What to expect
What a visit looks like
We have 2,500+ five-star reviews (Google, Yelp and Facebook), and the visit goes about the same way every time.
- You book online and tell us the grill type and the problem.
- Our technician arrives at the window we gave you, insured and with tools and common parts.
- We look the grill over and tell you what we found before we start work.
- We clean, repair or both, on the same visit when parts are on the truck.
- We clean up our work area and go over what we did.

