Mobile service
We Come to You in Loxahatchee Groves
Every job happens at your house. Nobody has to load a greasy grill into a truck bed or leave it at a shop for a week. A technician pulls up, sets up beside the grill, and works on it where it stands.
This matters most for built-ins. A grill set into a masonry or stainless island can't be carried anywhere, and it doesn't need to be. We cover homes along A Road, B Road, C Road, D Road, E Road, F Road, Folsom Road, Collecting Canal Road and the Okeechobee Boulevard side of town, and the rest of Loxahatchee Groves too. Freestanding carts, patio grills and side-burner setups get the same treatment.
Pro Grill is insured, the team has 50+ years of combined grill experience, and we have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep Grill Cleaning
A deep cleaning is not a scrape and a wipe-down. We take the grill apart to the parts that hold grease and carbon, and clean each one. Here is what is included:
- Cooking grates, scrubbed and cleared of carbon
- Burners, with every port cleared so the flame is even
- Heat plates or flavorizer bars
- Briquette trays
- Firebox, scraped out from the walls to the floor
- Drip tray and grease management system
- Igniter electrodes, cleaned so they spark where they should
- Hood and outside stainless, wiped and polished
- Cleanup of our work area when we finish
Buildup is more than a looks problem. Old grease feeds flare-ups and can catch fire inside the firebox. Clogged ports give you uneven heat, with one side searing and the other barely warm. Grease and moisture trapped against metal speed up rust, and burners that sit in that mix rot out long before they should. A clean grill lights easier, heats more evenly and lasts longer. It will not fix a part that is already worn out, and we will tell you if one needs replacing.

Start with the symptom
BBQ Repair at Your Door
Most grill problems come down to a small list of parts: burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators. We repair all of them, usually on the same visit. These are the problems we see most often.
Smells like gas
Usually a loose fitting, a worn hose or a failing valve. Shut the gas off at the tank or the line and do not light the grill until it has been checked. We test the connections and replace whatever is leaking.
Igniter clicks but won't light
Common causes are a dirty or misaligned electrode, a dead battery or a cracked wire. We clean and reposition the electrode first, then replace the igniter module or wiring if that does not do it.
Yellow, lazy flames
Spiders and insects like to nest in the venturi tubes, and a blocked tube starves the burner of air. We clear the tubes, clean the burner and check that the flame turns blue and steady.
Flare-ups and grease fires
Grease built up on heat plates and in the drip tray is the fuel. We clean out the firebox, replace burned-through plates or briquette trays, and fix the grease path so it drains the way it was built to.
Stuck on low flame
If every burner is weak even on high, the regulator has often tripped into low-flow bypass mode. We reset or replace the regulator and check the hose and tank connection.
Weak flame or hot spots
Dust and debris pack into burner ports over time, so gas only comes out of some of them. We clean every port. If the burner itself is corroded or warped, we replace it.
Knob spins but gas won't turn on
The knob has slipped off the valve stem or the valve has failed. We swap the knob or valve and check that the burner lights and adjusts through its whole range.
Repair it right
We Diagnose Before You Buy Parts
The same symptom can come from different problems. A grill that won't light might need a new igniter, or just a clean electrode, or a fresh regulator. Buying parts on a guess often means buying twice.
We check first, then tell you what the grill needs. To speed things up, send us a photo of the model and serial number label when you book, usually on the frame, inside the cabinet door or on the back panel. The truck carries parts for most brands, and we can order more from store.progrill.com if your grill needs something specific.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens
When a single part fails on a built-in, repairing it almost always makes more sense than replacing the whole grill. The island, the countertop and the gas line are already built around it. A new burner, valve or igniter gets it cooking again without tearing anything out.
We also design, fabricate and repair outdoor kitchens: cabinets, counters, doors, drawers and the grill cutouts that go with them. Beyond grills, we work on smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and Regular Maintenance
A grill inspection is a full check of the gas supply, burners and ignition, finished with a written report. It's useful if you are buying a house with a built-in, getting ready for a party, or just haven't looked inside your grill in a while. You get a plain list of what is fine, what is wearing and what needs work.
Most homes should have the grill deep cleaned every 6 to 12 months. If you grill several times a week, lean toward the short end. For people who would rather not think about it, the Protection Plan membership puts scheduled cleanings on the calendar so they happen without you having to call.
Wear and tear
What Wears Grills Out in Loxahatchee Groves
Loxahatchee Groves is inland, so salt air is not the main enemy here. Florida humidity and heat are. Moisture sits in the firebox and rusts grates, burners and heat plates from the inside, especially when grease is mixed in.
Dust gets into burner ports, and spiders and other insects build in the venturi tubes. Both choke off the gas and air mix, which is where weak flames, hot spots and yellow flames start. A regular cleaning and a quick check of the tubes before heavy grilling season go a long way.
When it's time to replace
New Grills: Measured, Installed, Hauled Away
Sometimes repair does not make sense: the firebox is rusted through, the frame is warped, or parts are no longer made. When that happens, we measure your cutout, sell you a grill that fits, install it and haul the old one away. You are not left with a dead grill in the yard.

What to expect
What a Visit Looks Like
- You pick a time and tell us what the grill is doing.
- The technician arrives and looks over the grill with you.
- We clean it, repair it, or both, at the grill.
- We test the burners and ignition before we leave.
- We clean up our work area and go over what we found.

