Mobile service
We come to you in Wellington
Pro Grill is a mobile grill cleaning and repair company. Our technicians drive to your home in Wellington, from Palm Beach Polo and Binks Forest to Olympia, Paddock Park and the Aero Club, and work on the grill where it sits. Nothing gets loaded into a truck bed or carried across town with grease still on it.
That matters most for built-ins. A grill set into a stone or stucco island can't go to a shop, so the work happens in your yard. Freestanding gas grills and carts get the same visit, and you skip the lifting and the mess in your car.
We started in Southern California in 2018, now work in Arizona too, and have serviced over 25,000 grills. Our team has 50+ years of combined grill experience, we are insured, and we have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep grill cleaning
A deep clean goes well past a scrape of the grates. We take the grill apart, clean each piece, and put it back together working. Every cleaning covers:
- Cooking grates, scrubbed free of carbon
- Burners, with ports cleared and tubes checked
- Heat plates or flavorizer bars
- Briquette trays and briquettes
- Firebox, scraped out from the bottom up
- Drip tray and grease management, emptied and cleaned
- Igniter electrodes, cleaned and tested
- Hood and outside stainless, degreased and wiped down
- Cleanup of our work area when we finish
Buildup is more than an eyesore. Grease and carbon feed flare-ups, plug burner ports so heat runs uneven, hold moisture against metal so it rusts, and slowly rot burners out from the inside. A clean grill lights more easily, heats more evenly and lasts longer.

Start with the symptom
BBQ repair at your home
Most grill trouble comes down to a handful of parts: burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators. We repair all of them on site, and our truck carries parts for most brands, so many fixes are done in a single visit. These are the problems we see most.
Igniter clicks but nothing lights
Usually a dirty or cracked electrode, a loose wire, or a dead module or battery. We test the spark, clean or replace what failed, and confirm the burner catches.
Weak flame or stuck under 300 degrees
Often the regulator has slipped into low-flow bypass mode, sometimes after the tank valve was opened too fast. We reset or replace the regulator and check the gas pressure at the burners.
One burner weaker than the rest
Dust, grease and debris block the burner ports, or the burner is partly rusted. We clean the ports, and if the metal is thin we replace the burner.
Spiders in the venturi tubes
Spiders and insects build nests in the tubes that feed the burners, which gives yellow, lazy flames or fire at the knobs. We clear the tubes and burners and check for damage.
Flare-ups and grease fires
Grease built up on the heat plates, in the firebox and in the drip tray is the fuel. We strip it out, replace worn heat shields if needed, and reset how grease drains.
Hot spots and uneven cooking
Burned-through briquette trays or heat plates, clogged ports and warped parts send heat where it shouldn't go. We find which one it is and replace it.
Knob spins but the gas won't turn on
The knob has slipped on a worn valve stem, or the valve itself is stripped or sticking. We replace the knob or valve and test for leaks.
Smells like gas
Shut the gas off at the tank and don't light the grill until it's been checked. A leak usually comes from a hose, a fitting or a worn valve, and we pressure-test the system before it goes back in use.
Repair it right
We diagnose before we buy parts
The same symptom can have several causes. A grill that won't stay lit might need a new regulator, a clean burner or a different thermocouple, and guessing means paying for parts you didn't need. We check the gas supply, burners, valves and ignition first, then fix what is actually broken.
If you can, snap a photo of the model and serial number label before we arrive. It usually sits on the frame, inside a cabinet door or near the gas inlet. With it we can pull the right parts before we leave the shop. The truck carries parts for most brands, and more are available at store.progrill.com.
Built-ins & outdoor kitchens
Built-in grills and outdoor kitchens
When one part fails on a built-in, repair is almost always the better move. The island, the countertop and the gas line are already built around that grill, and replacing a burner or valve costs far less than tearing out a cutout. We repair first and talk replacement only when the grill's frame or firebox is truly done.
We also design, fabricate and repair outdoor kitchens, from a single island to a full cooking area. And the work doesn't stop at gas grills: we service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and regular maintenance
An inspection is a full check of the gas connections, burners and ignition, finished with a written report. It tells you what's in good shape, what is wearing out and what to fix first. It is useful before a big cookout, after a grill has sat unused, or when you are deciding whether an older grill is worth keeping.
Most homes need a deep clean every 6 to 12 months, and grills that run several times a week need it more often. If you'd rather not keep track, the Protection Plan membership sets up scheduled cleanings so the grill gets looked after without you calling each time.
Wear and tear
What wears grills out in Wellington
Humidity and heat are hard on gas grills here. Moisture sits in the firebox and on the burners, and a grill left uncovered through the wet months picks up rust and stuck valves faster than you would expect.
Dust and insects are the other usual trouble. Spiders and other bugs crawl into the venturi tubes and block the gas, which leads to weak or uneven flames and sometimes flashback. A clean-out and a tight cover go a long way.
When it's time to replace
When a new grill makes sense
Sometimes repair doesn't add up, such as a rusted-through firebox, a cracked body or a grill where parts are no longer made. In that case we measure your cutout or cart space, sell you a grill that fits, install it and haul the old one away.

What to expect
What a visit looks like
- You book online and tell us what the grill is doing.
- A technician arrives in the scheduled window with tools and common parts.
- We look the grill over and explain what we found before starting work.
- We clean, repair or both, then test the burners and ignition.
- We clean up our work area and walk you through what we did.

