Mobile service
We Come to You in Port Hueneme
A Pro Grill technician drives to your home with the tools, cleaning supplies and parts, and works on the grill where it stands. Nothing gets loaded into a truck bed or hauled to a shop, and you don't carry a greasy grill anywhere.
This matters most for built-ins. A grill set into a stone or stucco island is not going anywhere, so we clean and repair it in place. We work across Port Hueneme, including Old Town, Hueneme Beach, Surfside, Bubbling Springs, Moranda Park and the streets around Naval Base Ventura County. Freestanding carts and kettles get the same service on the patio or in the driveway.
We have been at this since 2018 and have serviced more than 25,000 grills across Southern California and Arizona. Our team has 50+ years of combined grill experience, we are insured, and we have 2,500+ five-star reviews (Google, Yelp and Facebook).
Deep cleaning
Deep Grill Cleaning
A deep cleaning goes well past a wire brush on the grates. We take the grill apart, clean each piece, and put it back together working. A full cleaning includes:
- Cooking grates, scrubbed and rinsed
- Burners, cleared of carbon and checked port by port
- Heat plates or flavorizer bars, scraped or replaced if they are past saving
- Briquette trays and briquettes
- The firebox, scraped down to bare metal walls
- Drip tray and grease management system, emptied and cleaned out
- Igniter electrodes, cleaned so they spark where they should
- Hood, and the stainless on the outside, cleaned and polished
- Cleanup of our work area when we are done
Buildup is not just a looks problem. Old grease feeds flare-ups and can catch in the firebox. Caked burners put out uneven heat, with hot spots on one side and a cold corner on the other. Grease and moisture trapped against metal speed up rust, and burners that sit in that mess rot out from the inside. A clean grill lights easier, cooks more evenly and lasts longer.
A cleaning will not turn a worn-out grill into a new one, and we will tell you straight if a part is finished.

Start with the symptom
BBQ Repair for Port Hueneme Grills
We repair burners, valves, igniters, grates, briquettes, heat plates, knobs and regulators, usually in one visit. These are the problems we see most.
Igniter clicks but the grill won't light
Sometimes it is a dead battery or a dirty electrode. Sometimes it is a cracked electrode, a bad wire or a failed module. We test each one.
Low heat
A grill that used to hit 500 degrees and now struggles is often a regulator problem, a clogged burner or a partly closed valve. Low heat is rarely just one thing.
Uneven or yellow flames
Blue, steady flames are what you want. Yellow, lazy or patchy flames point to blocked ports, debris in the venturi tubes or an air mixture that is off.
Burners rusted through
Once a burner has holes or flaking walls, cleaning will not save it. We replace it with a matching burner and check the flame across the whole length.
Sticking or leaking valves
A knob that is stiff, or one that won't shut off fully, needs attention before you use the grill again. We test for leaks and replace valves that fail.
Worn or rusted grates
Grates that are pitted, bent or shedding flakes should be replaced. We fit new ones to your model, in stainless, cast iron or porcelain-coated steel as the grill calls for.
Briquette trays and heat shields
These take the worst of the drippings. When they burn through, grease reaches the burners, so we swap them before it does.
Ignition modules and wiring
If you get no spark at all, or a click with no spark at the tip, we trace it from the battery or switch to the electrode.
Rotisserie motors and grill lights
A rotisserie that stalls or a light that has gone dark usually comes down to a motor, a switch or a connection. We check and replace what has failed.
Repair it right
We Diagnose Before We Sell You Parts
The same symptom can come from different causes. A grill that won't light might need a battery, an electrode, a module or a gas fix, and guessing means paying for parts you didn't need. We check first, then tell you what is wrong and what it takes to fix it.
When you book, send a photo of the model and serial number label, usually on the frame, inside a door or under the control panel. It lets us bring the right parts the first time. Our truck carries parts for most brands, and more are available at store.progrill.com, including parts for most built-in grills.
Built-ins & outdoor kitchens
Built-In Grills and Outdoor Kitchens
When one part fails on a built-in, repair is usually the smarter move. The island, the countertop and the gas line are already in place, and the grill itself is often built to last decades. Replacing a burner, a valve or an ignition system costs far less than tearing out a cutout and starting over.
We also design, fabricate and repair outdoor kitchens: islands, countertops, doors and drawers, side burners, and the work that ties it all together. If a kitchen needs a rebuilt frame or new access doors, we can do that too.
Beyond grills, we service smokers, griddles, pizza ovens, fireplaces and fire pits.

Inspections & maintenance
Inspections and Maintenance in Port Hueneme
A grill inspection is a full check of the gas connections, regulator, valves, burners and ignition. You get a written report listing what is fine, what is wearing and what needs work, so you can decide what to do and when.
Most homes should have the grill deep cleaned every 6 to 12 months. If you cook on it several times a week, lean toward the shorter end.
The Protection Plan is a membership for scheduled cleanings. We come on a regular cycle so you do not have to remember, and the grill stays in working shape between visits.
Wear and tear
What Wears Out Grills in Port Hueneme
Port Hueneme sits right on the ocean, and salt air is the main enemy of a grill here. It rusts burners, grates and heat shields faster than they would rust inland, and it dulls and pits stainless steel that looks fine in other places.
It also corrodes igniter tips and wire connections, which is why a grill can start misfiring after a season or two. A cover helps, and so does regular cleaning. Rinsing and wiping down the outside stainless between visits slows the damage.
When it's time to replace
New Grills: Measured, Installed, Old One Hauled Away
Sometimes repair does not make sense: the firebox has rusted through, the frame is failing, or parts cost more than the grill is worth. In that case we can help you swap it.
We measure the cutout or the space, sell you a grill that fits, install it and connect it, and haul the old one away. You do not have to coordinate delivery, a hookup and a dump run yourself.

What to expect
What a Visit Looks Like
- You book online and send the model and serial number photo if you have it.
- The technician arrives in the window we gave you and looks over the grill.
- We tell you what we found and what we recommend before starting work.
- We clean, repair or both, then test the grill, including the ignition and the flames.
- We clean up our work area and go over what we did.

